3S6: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
Tektronix Type [[240]]. In a typical setup, the programming unit is connected to the 568 using a | Tektronix Type [[240]]. In a typical setup, the programming unit is connected to the 568 using a | ||
multipin cable. The 568 routes those signals to the plug-ins. | multipin cable. The 568 routes those signals to the plug-ins. | ||
* [http://bama.edebris.com/download/tek/3s6/3s6.djvu Tektronix 3S6 Manual (DjVu)] | |||
* [http://w140.com/tek_3s6.pdf Tektronix 3S6 Manual (PDF)] | |||
Revision as of 18:46, 14 January 2011
The Tektronix 3S6 is a dual-trace sampling module for 560-series scopes, particularly the 568. It interfaces with the sampling heads through a connector on its rear panel. It is programmable, allowing settings such as mV/cm to be controlled by an external programming unit such as the Tektronix Type 240. In a typical setup, the programming unit is connected to the 568 using a multipin cable. The 568 routes those signals to the plug-ins.