FG504: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
manuals= | manuals= | ||
* [http://w140.com/smb/FG504_SM.pdf Tektronix FG504 Manual (OCR, PDF)] | * [http://w140.com/smb/FG504_SM.pdf Tektronix FG504 Manual (OCR, PDF)] | ||
}} | }} | ||
| Line 16: | Line 15: | ||
{{Spec | AM input | 10 V<sub>p-p</sub> for 100% }} | {{Spec | AM input | 10 V<sub>p-p</sub> for 100% }} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
==Links== | |||
* [[Media:Tekscope 1976 V8 N2.pdf | Tekscope Vol. 8 No. 2, 1976]]: Ira Pollock, ''The FG504 - a new standard in function generators'' | |||
==Pictures== | ==Pictures== | ||
Revision as of 22:19, 27 June 2017
The Tektronix FG504 is a 40 MHz function generator plug-in for the TM500 system.
Key Specifications
| Frequency range | Sine, Triangle and Square - 0.001 Hz to 40 MHz; Ramps, Pulses or asymmetric waveforms - 0.001 Hz to 4 MHz |
|---|---|
| Duty Cycle | 7% to 93% |
| Output Amplitude | 30 Vp-p (OC), 15 Vp-p (50 Ω) |
| Output Attenuator | 0 to 50 dB in 10 dB steps |
| DC Offset | ±7.5 V (OC), ±3.75 V (50 Ω) |
| Distortion | ≤ 0.5% from 20 Hz to 40 kHz |
| Rise/Fall Time | 6 ns (fixed), 10 ns to 100 ms in 7 steps + variable control |
| Sweep | 1000:1 (500:1 on 106 mult.) |
| AM input | 10 Vp-p for 100% |
Links
- Tekscope Vol. 8 No. 2, 1976: Ira Pollock, The FG504 - a new standard in function generators
Pictures
-
FG504 front panel
-
FG504 in mainframe
-
FG504 without covers
-
Main board - output amplifier, attenuator, rise/fall time switch
-
Detail of output amplifier. Trimmer capacitors for high frequency compensation.
-
Detail of 50 Ω attenuator. Divider networks (under the ceramic chips) are switched in or bypassed by cam switches. The 0.3 amp output fuse can also be seen.
-
Ceramic 10 dB divider lifted to show resistor network. Laser trimming marks can be seen.
-
Function generator board that synthesizes the triangle and sine out of a square wave
-
Timer board
-
Circuit detail
-
-
-
-
