536: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
David Wise (talk | contribs) m (remove extraneous word led to minor sentence rework) |
||
Line 18: | Line 18: | ||
The Type 536 does not contain trigger and sweep circuitry. | The Type 536 does not contain trigger and sweep circuitry. | ||
To use a 536 as a conventional oscilloscope, | |||
a | install a [[T|Type T]] timebase plug-in in the Horizontal bay. | ||
The 536 contains identical vertical and horizontal amplifiers, with a front panel control to set the two in phase. This allows an equal bandwidth of 11 MHz in both directions. It also has a special CRT with equal bandwidths in both directions. Aside from the amplifiers, the only other circuitry in the entire scope are the power supplies and calibrator. | The 536 contains identical vertical and horizontal amplifiers, with a front panel control to set the two in phase. This allows an equal bandwidth of 11 MHz in both directions. It also has a special CRT with equal bandwidths in both directions. Aside from the amplifiers, the only other circuitry in the entire scope are the power supplies and calibrator. |
Revision as of 09:12, 2 August 2017
The Tektronix Type 536 is an X-Y scope introduced in 1957
that takes two letter-series and 1-series plug-ins,
one for the horizontal axis and one for the vertical axis.
The Type 536 does not contain trigger and sweep circuitry. To use a 536 as a conventional oscilloscope, install a Type T timebase plug-in in the Horizontal bay.
The 536 contains identical vertical and horizontal amplifiers, with a front panel control to set the two in phase. This allows an equal bandwidth of 11 MHz in both directions. It also has a special CRT with equal bandwidths in both directions. Aside from the amplifiers, the only other circuitry in the entire scope are the power supplies and calibrator.
Specifications
please add
Pictures
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Top
-
Left
-
Right
-
right internal