7D13: Difference between revisions
No edit summary |
No edit summary |
||
| Line 9: | Line 9: | ||
manuals= | manuals= | ||
* [http://w140.com/smb/7d13_sm.pdf Tektronix 7D13 Service (OCR, PDF)] | * [http://w140.com/smb/7d13_sm.pdf Tektronix 7D13 Service (OCR, PDF)] | ||
* [[Media:7000 Series Digital Plug-In Applications.pdf|7000 Series Digital Plug-In Applications (PDF)]] | |||
}} | }} | ||
The '''Tektronix 7D13''' is a digital multimeter plug-in for [[7000-series scopes]] with CRT readout. It will function in any compartment. | The '''Tektronix 7D13''' is a digital multimeter plug-in for [[7000-series scopes]] with CRT readout. It will function in any compartment. | ||
Revision as of 01:21, 16 June 2018
Template:Plugin Sidebar 2 The Tektronix 7D13 is a digital multimeter plug-in for 7000-series scopes with CRT readout. It will function in any compartment.
The input section is galvanically isolated, allowing the input to float ±1500 volts with respect to chassis ground.
Key Specifications
| Functions | DC Volts, DC Current, Resistance, Temperature |
|---|---|
| Voltage Ranges | 1.999 V, 19.99 V, 199.9 V, 1000 V (max. 500 V via P6058) |
| Input impedance | 10 MΩ |
| Current ranges | 1.999 mA, 19.99 mA, 199.9 mA, 1999 mA |
| Resistance ranges | 199.9 Ω, 1999 Ω, 19.99 kΩ, 199.9 kΩ, 1999 kΩ |
| Temperature | 7D13: -55 °C to +125 °C, requires P6058 voltage/temperature probe or P6430 temperature probe 7D13A: requires P6601 PT-100 probe |
Internals
The 7D13 consists of an analog pulse width modulator front-end built with 741 op amps and dual FETs, and a 3½ digit counter section using standard 74xx TTL parts which is interfacing with the readout system (through a 155-0038-00 D/A converter). The front end is isolated by transformers used for pulses and a floating ±15 V supply. The Probe jack for the P6058 (a 4-pin LEMO S-series connector) has contacts for the temperature sensor (a diode-connected transistor) as well as the voltage input terminals.
Links
Pictures
-
-
from manual
