514: Difference between revisions
No edit summary |
No edit summary |
||
Line 18: | Line 18: | ||
''or'' an instrument with DC response (the [[512]]). The 514 provides DC response ''and'' 10 MHz bandwidth. | ''or'' an instrument with DC response (the [[512]]). The 514 provides DC response ''and'' 10 MHz bandwidth. | ||
The 514 uses a [[5CPA]] CRT with a total accelerating voltage of 3 kV (−1.5 kV on the CRT cathode and +1.5 kV on the CRT anode). | |||
The 514 uses a [[5CPA]] CRT with a total accelerating voltage of | |||
( | |||
The standard [[phosphor]] for a 514 was P1. | The standard [[phosphor]] for a 514 was P1. | ||
The deflection sensitivity of the CRT is approximately 27 V/cm vertical and 32 V/cm horizontal. | The deflection sensitivity of the CRT is approximately 27 V/cm vertical and 32 V/cm horizontal. | ||
The power supply is regulated based on a | The power supply is regulated based on a −140 V reference produced by an [[OD3]] gas regulator tube. | ||
The +225 V supply uses three [[5V4G]] rectifier tubes in parallel. | The +225 V supply uses three [[5V4G]] rectifier tubes in parallel. | ||
Line 30: | Line 28: | ||
on some models), which has a 24-section 250 ns lumped L-C [[delay line]]. | on some models), which has a 24-section 250 ns lumped L-C [[delay line]]. | ||
There was also an 'A' version (514-A & 514-AD respectively), which appears to have been available in 1954. | There was also an 'A' version (514-A & 514-AD respectively), which appears to have been available in 1954. | ||
''(There were also some models marked 'Series A', which may have been a predecessor to the 514A? | ''(There were also some models marked 'Series A', which may have been a predecessor to the 514A? How does the 514AD differ from the 514D?)'' | ||
How does the 514AD differ from the 514D?)'' | |||
It has no [[thermal cutoff]]. | It has no [[thermal cutoff]]. | ||
Line 39: | Line 36: | ||
{{Spec | Input impedance |1 MΩ // 30 pF }} | {{Spec | Input impedance |1 MΩ // 30 pF }} | ||
{{Spec | Vertical deflection | 100 V/cm down to 300 mV/cm (DC) / 30 mV/cm (AC), 1 - 3 - 10 sequence}} | {{Spec | Vertical deflection | 100 V/cm down to 300 mV/cm (DC) / 30 mV/cm (AC), 1 - 3 - 10 sequence}} | ||
{{Spec | Weight | | {{Spec | Weight | 28.1 kg (62 pounds) }} | ||
{{Spec | Power consumption | 375 W }} | {{Spec | Power consumption | 375 W }} | ||
{{EndSpecs}} | {{EndSpecs}} |
Revision as of 09:42, 29 August 2018
The Tektronix 514 is a monolithic general-purpose oscilloscope introduced in 1949 or 1950.
It was designed by Tektronix engineers Bob Davis and Dick Rhiger.
Using a three-section distributed amplifier, it provides frequency response from DC to 10 MHz. Prior to the 514, customers had to choose between an instrument with 10 MHz bandwidth (the 511) or an instrument with DC response (the 512). The 514 provides DC response and 10 MHz bandwidth.
The 514 uses a 5CPA CRT with a total accelerating voltage of 3 kV (−1.5 kV on the CRT cathode and +1.5 kV on the CRT anode). The standard phosphor for a 514 was P1. The deflection sensitivity of the CRT is approximately 27 V/cm vertical and 32 V/cm horizontal.
The power supply is regulated based on a −140 V reference produced by an OD3 gas regulator tube. The +225 V supply uses three 5V4G rectifier tubes in parallel.
Throughout its production run, a 'D' variant was available (514D, with the 'D' being stamped in by hand on some models), which has a 24-section 250 ns lumped L-C delay line. There was also an 'A' version (514-A & 514-AD respectively), which appears to have been available in 1954. (There were also some models marked 'Series A', which may have been a predecessor to the 514A? How does the 514AD differ from the 514D?)
It has no thermal cutoff.
Key Specifications
Frequency response | DC to 10 MHz |
---|---|
Input impedance | 1 MΩ // 30 pF |
Vertical deflection | 100 V/cm down to 300 mV/cm (DC) / 30 mV/cm (AC), 1 - 3 - 10 sequence |
Weight | 28.1 kg (62 pounds) |
Power consumption | 375 W |
Links
Pictures
-
Front
-
514AD with B&K Curve Tracer
-
Distributed vertical amp
-
Delay line trimmer caps
-
Bottom view
-
Power Supply
-
Upper Deck, rear
-
Upper Deck, front
-
Lower Deck, front
-
Lower Deck, rear
-
Fan Motor
-
Line Socket
-
Vertical amp schematic
-
Vertical preamp, early
-
HV Power Supply, early
-
514AD
-
514AD
-
514AD
-
514AD
-
514AD
-
514AD
-
514AD
-
514AD
-
514AD
-
514AD