5000 Series plug-in interface: Difference between revisions

From TekWiki
Jump to navigation Jump to search
(Created page with "'''Tektronix 5000 series oscilloscope mainframes''' have two vertical plug-in slots, and one horizontal plug-in slots. The interconnect on either slot ...")
 
No edit summary
Line 24: Line 24:
|  3 ||  ||  Line trigger
|  3 ||  ||  Line trigger
|-  
|-  
|  4 || Right trig in ||  Left trig in
|  4 || Trig out (H) / Right trig in (V) ||  Left trig in (V)
|- bgcolor="Pink"
|- bgcolor="Pink"
|  5 ||  || −30 V
|  5 ||  || −30 V

Revision as of 10:02, 9 September 2018

Tektronix 5000 series oscilloscope mainframes have two vertical plug-in slots, and one horizontal plug-in slots.

The interconnect on either slot type is a 56-pin PCB edge connector.

Looking into the mainframe from the front panel, "A" pins are left of the connector centerline and "B" are on the right. Pins are numbered from 1 at the bottom to 28 on the top.

  A side B side
Pin Function Function
1
2 Utility GND +5 V
3 Line trigger
4 Trig out (H) / Right trig in (V) Left trig in (V)
5 −30 V
6 +15 V −15 V
7 +plugin signal −plugin signal
8
9 Z Axis A Sweep Intensify
10 A gate Z Axis B Sweep
11 Sample pulse Load stop
12 Single-sweep mode
13 +plugin signal −plugin signal
14 Clean GND Return Clean GND Return
15 A sweep ALT drive
16 Lockout B sweep Trace separation
17 Lockout A sweep Single sweep reset
18 Chop sense Display on
19 100 μs/div detect Display chop
20 Chop activate
21
22
23
24 Sweep rate
25
26
27
28

Pin group function legend

Plugin power & ground
HF signals
Readout system signals
Retrieved from "https://w140.com/tekwiki/index.php?title=5000_Series_plug-in_interface&oldid=36628"