Active Probes: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 46: | Line 46: | ||
||[[P6204]] || 10x || 1.5m || 10||1.9||1|| ±10 V||±15 V ||40 V||50 Ω|| [[Tekprobe BNC connector]]|| Y | ||[[P6204]] || 10x || 1.5m || 10||1.9||1|| ±10 V||±15 V ||40 V||50 Ω|| [[Tekprobe BNC connector]]|| Y | ||
|- | |- | ||
||[[P6207]] || 10x || 1m || 0.1||0.4||4|| ±4 V|| ±5 V|| 40 V||50 Ω|| [[Tekprobe SMA connector]]|| | ||[[P6207]] || 10x || 1m || 0.1||0.4||4|| ±4 V|| ±5 V|| 40 V||50 Ω|| [[Tekprobe SMA connector]]|| N/A | ||
|} | |} | ||
Revision as of 21:59, 8 April 2020
Active Probes contain an active element like a FET or a tube right at the tip of the probe. This allows to eliminate cable loading and create higher input impedances, most useful for high frequency probing.
| Specification Summary (Please Expand) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Model | Attenuation | Length | Input Loading | Bandwidth GHz |
Dynamic Range | Offset Range | Max. Voltage | Target Impedance |
Power Source | Readout pin | |
| R / MΩ | C / pF | ||||||||||
| P6032 | 10x | 6ft. | 10 | 3.6 | 0.85 | ±1.5 V | N/A | 1.5× Dyn. Range | 50 Ω | 4-pin 1S1 type | N |
| 20x | 2.6 | ±3 V | |||||||||
| 50x | 3 | ±7.5 V | |||||||||
| 100x | 1.5 | ±15 V | |||||||||
| 200x | 1.4 | ±30 V | |||||||||
| 500x | 1.3 | ±75 V | |||||||||
| 1000x | 1.3 | ±150 V | |||||||||
| P6201 | 100x | 6ft. | 1 | 1.5 | 1.1 | ±60 V | ±200 V | 200 V | 50 Ω | 7000 Series Lemo | Y |
| 10x | 1 | 1.5 | 1.1 | ±6 V | ±56 V | 200 V | |||||
| 1x | 0.1 | 3 | 1.1 | ±06 V | ±5.6 V | 50 V | |||||
| P6202A | 100x | 2m | 10 | 2 | 0.5 | ±60 V | ±200 V | 200 V | 50 Ω | 7000 Series Lemo | Y |
| 10x | 10 | 2 | 0.5 | ±6 V | ±55 V | 200 V | |||||
| P6204 | 10x | 1.5m | 10 | 1.9 | 1 | ±10 V | ±15 V | 40 V | 50 Ω | Tekprobe BNC connector | Y |
| P6207 | 10x | 1m | 0.1 | 0.4 | 4 | ±4 V | ±5 V | 40 V | 50 Ω | Tekprobe SMA connector | N/A |