5223: Difference between revisions

Revision as of 14:25, 9 August 2021

Tektronix 5223
10 MHz analog/digital mainframe Tektronix 5223 Produced from 1981 to 1988 Manuals Tektronix 5223 Service Manual Tektronix 5223 Operation Manual Service Manual needed (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 5223 is a 10 MHz mainframe with digital storage. The 5B25N timebase was designed for this scope.

When equipped with Option 10 (GPIB), some major parts of the internal control circuits were changed and the scope was called "5223 Option 10". There is a complete different set of user and service manual for this model.

Key Specifications

Bandwidth (analog)	12 MHz (mainframe tested with 067-0680-00), 10 MHz with 5A38, 5A45, 5A48; X axis 7 MHz
Fastest cal. sweep	20 ns/Div
Sample rate	up to 1 MS/s (1 vertical bay) / 500 kS/s (2 bays)
Resolution	10 bit
Memory	1k samples per vertical bay
CRT	8×10 Div @ 1.22 cm/Div, 15 kV acceleration, P31 phosphor
Features	Roll mode Recorder output GPIB interface (Option 10)

Links

Vol. 12 No. 4, Dec 1980: Cliff Baker, Digital Storage and Plug-in Versatility Distinguish New 10-MHz 5000-Series Oscilloscope

Pictures

rack-mount version
5223 with 5L4N and 5B25N
5223 rear panel
A18 Board of 5223 Option 10

ROM images

@@ Line 1: / Line 1: @@
 {{Oscilloscope Sidebar |manufacturer=Tektronix |designers= |
+series=5000-series scopes |
 model= 5223 |
 summary=10 MHz analog/digital mainframe |
@@ Line 11: / Line 12: @@
 * Service Manual needed [[Category:Manual needed]]
 }}
-The '''Tektronix 5223''' is a 10 MHz mainframe with digital storage.  The [[5B25N]] timebase was designed for this scope. When equipped with Option 10 ([[GPIB]]), some major parts of the internal control circuits were changed and the scope was called "5223 Option 10". There is a complete different set of user and service manual for this model.
+The '''Tektronix 5223''' is a 10 MHz mainframe with digital storage.  The [[5B25N]] timebase was designed for this scope.
+When equipped with Option 10 ([[GPIB]]), some major parts of the internal control circuits were changed and the scope was called "5223 Option 10". There is a complete different set of user and service manual for this model.
 {{BeginSpecs}}