390AD: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Instrument Sidebar | {{Instrument Sidebar | ||
|manufacturer=Tektronix | |manufacturer=Sony/Tektronix | ||
|model=390AD | |model=390AD | ||
|class=Digitizer | |class=Digitizer | ||
| Line 14: | Line 14: | ||
* ''Service manual needed'' [[Category:Manual needed]] | * ''Service manual needed'' [[Category:Manual needed]] | ||
}} | }} | ||
The '''Tektronix 390AD''' is a digitizer with a 15 MHz bandwidth and a GPIB interface, released in the early 1980s. | The '''Sony/Tektronix 390AD''' is a digitizer with a 15 MHz bandwidth and a GPIB interface, released in the early 1980s. | ||
==Specifications== | ==Specifications== | ||
Revision as of 03:04, 25 August 2021
The Sony/Tektronix 390AD is a digitizer with a 15 MHz bandwidth and a GPIB interface, released in the early 1980s.
Specifications
It can digitize two channels at up to 30 MS/s or one channel at up to 60 MS/s, at 10 bits of voltage resolution.
Dynamic accuracy is 8.5 bits up to 1 MHz and 7.5 bits up to 10 MHz. The memory is 4096 samples, which can be used for digitizing a single waveform or for two waveforms at 2048 samples each.
The 390AD has a "Rate Switching" feature where it starts an acquisition at one sample rate, and then switches to a second sample rate. The 390AD can be set to trigger from either of the two vertical signals or from an external trigger signal.
The signals acquired on a 390AD can be exported via GPIB or displayed on an external CRT (Tek 624 is recommended) in X-Y mode.
