AM502: Difference between revisions

Revision as of 01:50, 25 May 2022

Tektronix AM502
differential amplifier Tektronix AM502 Produced from 1974 to (?) Manuals AM502 Instruction Manual 070-1582-00 AM502 Instruction Manual 070-1582-01 (All manuals in PDF format unless noted otherwise)

The Tektronix AM502 is a differential amplifier plug-in for the TM500 system.

The differential amplifier design is a variant of the 1A7A circuit, also used with modifications in the 3A9, 7A22, 5A22N, and 5030/5031 (26A2 too?).

Bandwidth	1 MHz, LF limit switchable DC, 0.1 Hz to 10 kHz in ×10 steps, HF limit switchable 100 Hz to 1 MHz in ×3/×10 steps, AC coupled > 2 Hz
Gain	×1 to ×1000 (÷ 100 mode) / ×100 to ×100,000 in 1–2–5 sequence, variable to min. ×2.5 calibrated setting
Input impedance	1 MΩ // 47 pF (either input)
Input voltage	15 V DC+peak AC up to 5 MHz, 350 V DC+peak AC up to 5 MHz in ÷ 100 mode
Common mode	±5 V, ±50 V in ÷ 100 mode
DC offset	±1 V
Noise	typ. 6 nV/√Hz above 1 kHz (Norm mode)
Output voltage	±5 V into ≥250 Ω

@@ Line 1: / Line 1: @@
 {{TM500 | mfg=Tektronix | type=AM502 | function=differential amplifier | class=amplifier | image=Tek am502 1.jpg | introduced=1974 | discontinued=(?) | designers= | manuals=
-* [[Media:070-1582-00.pdf | AM502 Manual (-00)]] (PDF)
+* [[Media:070-1582-00.pdf | AM502 Instruction Manual 070-1582-00]]
-* [[Media:070-1582-01.pdf | AM502 Manual (-01)]] (PDF)
+* [[Media:070-1582-01.pdf | AM502 Instruction Manual 070-1582-01]]
 }}
 The differential amplifier design is a variant of the [[1A7A]] circuit, also used with modifications in the [[3A9]], [[7A22]], [[5A22N]], and [[5030]]/[[5031]] ([[26A2]] too?).