119-2000-0x: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
No edit summary |
||
Line 5: | Line 5: | ||
<gallery> | <gallery> | ||
11a34_right.jpg|Four 119-2000-02 attenuators in an [[11A34]] | 11a34_right.jpg|Four 119-2000-02 attenuators in an [[11A34]] | ||
Tek 119-2000-02 1.jpg|119-2000-00 attenuator, Peltola cable removed | Tek 119-2000-02 1.jpg|119-2000-00 attenuator, [[Peltola connector|Peltola cable]] removed | ||
Tek 119-2000-00 input connector.jpg|Input connector | Tek 119-2000-00 input connector.jpg|Input connector | ||
Tek 119-2000-00 relays 1.jpg|Relays | Tek 119-2000-00 relays 1.jpg|Relays |
Revision as of 14:05, 14 February 2023
The Tektronix 119-2000-0x attenuator module is used in the 11A32 and 11A34 plug-ins. The input is a Tekprobe BNC connector. The attenuator module provides a 50 Ω input termination resistor that can be selected by software/relay.
-
Four 119-2000-02 attenuators in an 11A34
-
119-2000-00 attenuator, Peltola cable removed
-
Input connector
-
Relays
-
Relays
-
Relays
-
Relay
-
Relay contacts
-
Amplifier hybrid
-
Amplifier hybrid
-
Amplifier hybrid
-
Connection between hybrids
-
Printed circuit board and flat flex cable
-
Laser trimming
-
Laser trimming
-
Laser trimming
-
Laser trimming