P6009: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 39: | Line 39: | ||
Tek p6009 plain bnc.jpg|P6009 with plain BNC connector | Tek p6009 plain bnc.jpg|P6009 with plain BNC connector | ||
Tek p6009 schematic.png|P6009 Schematic | Tek p6009 schematic.png|P6009 Schematic | ||
Tek_Pobe_P6009_readout.jpg| different | Tek_Pobe_P6009_readout.jpg| different readout contact configurations: spring loaded pin (left) vs. spring metal clip with two contact points (right) | ||
</gallery> | </gallery> | ||
Revision as of 04:10, 6 July 2023
The Tektronix P6009 is a 120 MHz, 100x, passive probe for scopes with 1 MΩ input impedance.
There are two different connector options:
- Part number 010-0170-00 is a P6009 with a 9 foot cable and a plain BNC connector.
- Part number 010-0264-01 is a P6009 with a 9 foot cable and a BNC connector with readout ring. The extra pin on BNC connector allows the probe's 100x attenuation to be detected. However the P6009 does not have an "Identify" switch.
Key Specifications
| Attenuation | 100× ±3% with 1 MΩ ±2% scope input |
|---|---|
| Maximum Voltage | 1.5 kV DC + AC peak, derated above 200 kHz |
| Compensation range | 15 - 47 pF |
| Bandwidth | 120 MHz |
| Input capacitance | 2.5 pF |
Pictures
-
P6009 with readout BNC connector
-
P6009 with readout BNC connector
-
P6009 with readout BNC connector
-
-
P6009 with readout BNC connector
-
-
-
P6009 with plain BNC connector
-
P6009 Schematic
-
different readout contact configurations: spring loaded pin (left) vs. spring metal clip with two contact points (right)
