2335

Manuals – Specifications – Links – Pictures

The Tektronix 2335 is a ruggedized portable dual-channel, 100 MHz analog scope. An External trigger input on front and External Z-Axis connector at the rear round out its connectivity.

Vertical controls were by way of calibrated deflection factors on CH 1 or CH 2 inputs through AC, DC, or GND coupling. The vertical mode selections are CH 1, BOTH, CH 2, ADD, ALT, CHOP (500 kHz), TRIG VIEW, or BW LIMIT (20 MHz). Horizontal deflection is controlled by either the calibrated A or B Sweep Generators, or Alternate between the two of the A, and B Delayed Sweep.

Trigger modes may be one of four modes: Single Sweep Reset, P-P Auto-TV Line, Normal, and TV Field. Trigger sources can be Internal, Line, or External, and can be controlled by amplitude level and slope type. The Internal signal source(s) is(are) from signals applied to channels 1 or 2, or based on what Vertical Mode selected.

Key Specifications

Bandwidth	100 MHz (≥90 MHz at 2 mV/Div)
Deflection	CH1, CH2: 5 mV/Div to 5 V/Div, 1–2–5; all ±2%; Variable control can increase sensitivity to at least 2 mV/Div
Input Impedance	1 MΩ ±2% // 20±2 pF
Maximum Input	400 V (DC + peak AC) or 500 V (p-p ac at ≤ 1 kHz)
Sweep	A Time Base 0.5 s/div to 50 ns/div; B Time Base 50 ms/div to 50 ns/div; A and B ×10 magnifier extends max sweep to 5 ns/div
Trigger Source	INT (CH1, CH2), LINE, EXT (AC, DC, DC ÷ 10)
Probes	Two P6108A 100 MHz ×10 probes, BNC connector with a readout pin
Power	90 − 250 VAC, 48 − 440 Hz, 40 W max

Links

Documents Referencing 2335

Document	Class	Title	Authors	Year	Links
Tekscope 1981 V13 N2.pdf	Article	Three New Portable Oscilloscopes Designed for Field Service Use	Peter Zietzke	1981	2335 • 2336 • 2337

Pictures

• 
• 
• 

Components

Some Parts Used in the 2335

Part	Part Number(s)	Class	Description	Used in
155-0219-00	155-0219-00	Hybrid integrated circuit	output amplifier	2335 • 2336 • 2337
155-0220-00	155-0217-00	Hybrid integrated circuit	amplifier	2335 • 2336 • 2337