464: Difference between revisions
(+cat) |
m (-) |
||
| Line 9: | Line 9: | ||
The [[155-0077-01]] is listed as an alternative part for U464. | The [[155-0077-01]] is listed as an alternative part for U464. | ||
Triggering in the 464 is done using STD704 4. | Triggering in the 464 is done using STD704 4.7 mA 18 pF [[tunnel diodes]], | ||
part number 152-0125-00 or 152-0125-01. | part number [[152-0125-00]] or [[152-0125-01]]. | ||
The trigger amplifier is made of discrete BJTs and a [[155-0032-01]] amplifier IC, | The trigger amplifier is made of discrete BJTs and a [[155-0032-01]] amplifier IC, | ||
presumably an improved version of the [[155-0032-00]]. | presumably an improved version of the [[155-0032-00]]. | ||
Revision as of 03:07, 15 June 2014
The Tektronix 464 is a portable 100 MHz dual-trace CRT storage scope with dual time bases. It is a lower cost version of the 466, with a slower writing speed and without the reduced scan feature. The 464 has a linear power supply.
The vertical signal path of the 464 starts with a rotary cam-operated compensated attenuator. Next is a source-follower made with a 2N5911 dual JFET, part number 151-1032-00. Next is a discrete BJT-based preamp followed by diode-based channel switching and delay driver. The final vertical amplifier, U464, is the 155-0155-00. The 155-0077-01 is listed as an alternative part for U464.
Triggering in the 464 is done using STD704 4.7 mA 18 pF tunnel diodes, part number 152-0125-00 or 152-0125-01. The trigger amplifier is made of discrete BJTs and a 155-0032-01 amplifier IC, presumably an improved version of the 155-0032-00.
The horizontal amplifier is made of discrete BJTs.
Serial numbers B010100 through B079999 use the 154-0722-00 CRT. Serial numbers B080000 and up use the 154-0749-00 CRT.
