7633

Manuals – Specifications – Links – Pictures

The Tektronix 7633 is a 100 MHz, multi-mode storage mainframe that accepts two 7000-series vertical plug-ins and one 7000-series horizontal plug-in.

The 7633 is essentially a 7623 with a reduced-scan mode added to boost stored writing speeds.

After the 7633 and 7934 were discontinued in 1990, the 7623B (which added the reduced-scan mode to the 7623 and therefore had essentially the same specs and features as the 7633) was the last analog storage scope model in the 7000 series, available until the entire 7000 family was discontinued in 1992.

Key Specifications

Bandwidth	100 MHz
Fastest cal. sweep	5 ns/Div
Display modes	store, non-store, save
Storage modes	fast variable-persistence, variable-persistence, fast bistable, bistable
Scan modes	normal scan, reduced-scan mode for increased writing speed
Writing speed	fast var persist, reduced scan - 2222 Div/μs fast var persist, full scan - 150 Div/μs fast bistable, reduced scan - 400 Div/μs fast bistable, full scan - 50 Div/μs var persist, reduced scan - 3 Div/μs var persist, full scan - 0.5 Div/μs bistable, reduced scan - 0.2 Div/μs bistable, full scan - 0.03 Div/μs
CRT	8 × 10 divisions @ 0.9 cm, Tek T7630 (154-0721-00) transfer storage tube, P31 phosphor
Acceleration voltage	8.5 kV (10 kV in the reduced scan mode)
Features	digital readout calibrator, 1 kHz square wave, 40 mV, 400 mV and 4 V camera connector, external Z-axis input
Power.	max. 190 W
Weight	13.6 kg (30 lb)

Internals

The 7633 uses a Transfer storage CRT which includes an internal, fast-responding storage mesh. In fast mode, the time base is inhibited after a sweep, and the transfer cycle is started. Individual sweeps therefore occur in about one-second intervals.

The 7633's power power supply is linear.

Prices

1990: $10,500

Links

• Tek 7633 page @ amplifier.cd (with repair report)
• Tek 7633 page @ barrytech.com
• A 1000 cm/µs Storage Oscilloscope. Tekscope Vol 6 Number 2, Mar/Apr 1974. Article @ radiomuseum.org

Pictures

•