2642

Tektronix 2642
200 kHz Fourier Analyzer Tektronix 2642 Produced from 1991 to 1995 Manuals Tektronix 2642A Reference Manual Tektronix 2642A Service Manual Tektronix 2642 Introduction Spec Tektronix 2642A Final Spec (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 2642A is an FFT analyzer with a DC to 200 kHz frequency range. It performs signal acquisition and processing, and uses a PC running MS-DOS connected via a serial port for mass storage and graphics.

It has two or four inputs with dedicated 12-bit (optionally 16-bit) ADCs, and an optional arbitrary function generator. Another option is a "zoom" feature that provides a span as small as 10 Hz about the frequency of interest.

Key Specifications

Frequency range	DC to 200 kHz
Real-time bandwidth	100 kHz max. (single channel autospectrum with fast additive averaging, display off, 2048 point frame size)
Dynamic range	75 dB, extended to 90 dB with Opt. 16 or 17 (16-bit ADCs)
Channels	2 (optionally 4), matched ±0.075 dB (DC to 50 kHz)
Transient Capture	500 K Samples, extended to 3.5 M with Opt. 6M (6 MB)
FFT performance	32-bit floating point FFT, 64 tp 4096 points
Spectral Lines	25 to 1600
Input Impedance	1 MΩ // 200 pF
Max Input Level	±30 V
Weight	Standard accessories: 12.3 kg (27 lbs)
Power	90 − 250 V_AC, 48 to 66 Hz, >120 W
Connections	Front panel: CH1-CH4 inputs, BNC connector; Signal generator output BNC connector (50 Ω; ±10 V); Rear panel: SYSTEM INTERCONNECT, male DB9 (TTL-level inputs; pin 1 trigger input, pin 2 trigger sense output, pin 3 external clock input; pins 6–8 signal ground, pin 9 external sampling input); SERIAL PORT, female DB9 to connect PC