S-4
Template:Plugin Sidebar 2 The Tektronix S-4 is a sampling head for 7000- and 3S-series samplers. It was designed by George Frye and introduced in 1968. It is the fastest of the S-series plug-in samplers. (An interesting comparison of different sampling heads is found in "AN-3042a, Revision 1, 2/89".)
The S-4 sampling gate is based upon a traveling wave trapped-charge transmission line in which the sampling window is set by the propagation time of a pulse edge through a thick-film transmission line. This technique requires only a sharp pulse edge rather than a precise pulse width, which is harder to generate. The sampling diodes are housed in a special coaxial connector that provides a high bandwidth signal path.
Specifications
Key Specifications
Rise time | 25 ps (observed with S-50 or S-52, 35 ps) |
---|---|
Bandwidth | 14.5 GHz |
Input impedance | 50 Ω (terminated SMA port) |
Input range | operating, 1 Vp-p; max. safe overload, ±5 V |
Noise | < 5 mV |
Features |
|
Links
Pictures
-
-
Top view of the S4 plug-in
-
Left view
-
Right view
-
Schematic