TM5006
![](http://w140.com/tekwiki/images/thumb/a/ad/TM5006_rear.jpg/250px-TM5006_rear.jpg)
The Tektronix TM5006 is a six-bay mainframe with a GPIB interface for the TM5000 system.
The rightmost compartment (slot 6) can supply high-powered plugins.
The DC rails to the plugins are provided by a switchmode PSU. The supply is not universal input voltage however and must be set with two internal jumper. DC rails are 8V 26V and -26V. The case has a cooling fan which is connected to the PRIMARY of the transformer.
Available options include 02 Rear Inputs and 10 a set of 19-inch rackmount slides.
For option 02 six rear BNC connectors and a 50 pin standard 50 pin female dsub connector will be installed on the rear panel. In addition internal pin headers will be soldered internally. No internal wiring is provided.
The rack-mount kit has different sides compared to the standard model. It is not possible remove the standard carry handle to install a rack-mount kit. The entire side panel must be swapped.
Specifications
please add
Input Voltage 115 V or 230 V nominal (selected with an internal jumper) with options for high, medium or low (100 V 110 V 120 V) or (200 V 220 V 240 V) using a second internal jumper. Fan Flow Rate is higher in units with the 02 (rack-mount) option