155-0011-00
The Tektronix M012 (P/N 155-0011-00) is a clock and chop blanking monolithic integrated circuit in a 16-pin DIP, designed by Les Larson.
It generates the 2 MHz chop clock signal for triggering the chop counter (155-0010-00 aka M004) as well as the chop blanking waveform. The blanking waveform can be delayed in time and varied in width over a certain range to accommodate different delay lines. It also has fine logical inputs which are the plug-in and mainframe modes that are used to decide if chop blanking should be used at a certain time.
Used in
- 485
- 4851, 4852
- 7313
- 7403N
- 7504, 7514
- 7603 (U55)
- 7613, 7623, 7633 (U55)
- 7704, 7704A
- 7834
- 7844 (U205)
- 7854 (A14U12)
- 7904 (U215), 7904A, R7903
- 7912AD, 7912HB
- 7934
- 7104