2245
The Tektronix 2245 is a 100 MHz four-channel analog oscilloscope. Channels 1-2 are fully-functional, whereas 3-4 are limited in both deflection factor and coupling, as they are intended mainly for digital and trigger signals.
The 2245 includes features like AUTO SETUP which automatically adjusts vertical, horizontal, and triggering and display controls to provide a stable, triggered display of the waveform in seconds; Dual Time base with Delayed Sweep; Cursor Time/Voltage Measurements; On-Screen Scale Factor Readouts.
Key Specifications
| Bandwidth | 100 MHz |
|---|---|
| Deflection | CH 1, CH 2: 2 mV/div to 5 V/div in 1-2-5 seq; CH 3, CH 4: 0.1 V/div and 0.5 V/div, all ±2%; BW Limit: 20 MHz ±15% |
| Vertical Operating Modes | CH1,2,3,4, CH2 Invert, Add, Alt, Chop (625 kHz) |
| Input Impedance | 1 MΩ ±1.0% // 20 pF ±1 pF |
| Maximum Input Voltage | 400 V (DC + peak AC) or 800 V (p-p ac at ≤ 10 kHz) |
| Sweep Speeds | A Time Base: 0.5 s/div to 20 ns/div in 1-2-5 seq; B Time Base: 5 ms/div to 20 ns/div in 1-2-5 seq (×10 magnifier to 2 ns/div) |
| Trigger | DC, Noise Reject, HF Reject, LF Reject, AC, TV Line, TV Field |
| Trigger Modes | A Mode: Auto Level, Auto, Norm, TV Line, TV Field, Single Seq. B Mode: Runs After Delay, Auto Level, Norm, TV Line (From A Source) |
| Trigger Source A & B | Vert, CH1, 2, 3, 4, Line |
| Cursors | Time, Volts |
| Interface | Ext Counter/Timer Base Input connector; Ext Z-Axis Input connector |
| Probes | Two P6109 100 MHz ×10 probes, BNC connector with a readout pin |
| Power | 100 W max, 90 − 250 VAC, 48 − 445 Hz |
Repair Information
Links
Pictures
-
2245A
-
-
-
2245A
