213
The Tektronix 213 is a miniature portable oscilloscope introduced in 1975. It combines a 3½-digit DMM and a 1 MHz single channel scope in one unit. The maximum sweep rate is 0.4 μs/div with ×10 sweep magnifier.
The 213 provides true RMS voltage and current measurements. It is battery or AC line powered.
Key Specifications
— Multimeter Section — | |
DC Volts | 0.1 V to 1000 V, Input Resistance: 10 MΩ Accuracy, 0.1 V & 1 V: ±0.1%, ±3 counts; 10 V & 100 V: ±0.15%, ±1 count; 1000 V: ±0.2%, ±1 count |
True RMS Volts | DC Volts |
DC Current | 0.1 to 1000 mA Accuracy: 0.1 mA: ±0.5%, ±3 counts; 1 mA – 1000 mA: ±0.25%, ±3 counts |
True RMS Current | 0.1 to 1000 mA Accuracy, 0.1 mA: ±2.5%, ±5 counts (DC); ±1.5%, ±5 counts (40 Hz – 4 KHz); ±4.5%, ±5 counts (4 KHz - 40 KHz); 1 mA – 1000 mA: ±2.5%, ±5 counts (DC); ±1.5%, ±5 counts (40 Hz – 4 KHz); ±3.5%,±5 counts (4 KHz - 40 KHz) |
Current range input resistance | 0.1 mA: 1000 Ω; 1 mA: 100 Ω; 10 mA: 10.2 Ω; 100 mA: 1.2 Ω; 1000 mA: 0.3 Ω |
Resistance | 1 KΩ: ±0.5%, ±3 counts; 10 KΩ – 1 MΩ: ±0.5%, ±1 count; 10 MΩ: ±1%, ±1 count |
— Oscilloscope Section — | |
Voltage ranges | 5 mV/Div to – 100 V/Div, ±3% |
Bandwidth (Voltage) | DC – 1 MHz (at 10 mV/Div and below, 400 kHz) |
Current ranges | 5 µA/Div to 100 mA/Div, ±3% |
Bandwidth (Current) | DC – 200 kHz (5 µA/Div – 10 µA/Div); DC – 400 kHz (20 µA/Div – 200 mA/Div) |
Input resistance | 10 MΩ // 150 pF (5 mV/Div – 1 V/Div), 100 pF (2 V/Div to – 100 V/Div) |
Rise time | 875 ns (5mV – 10mV/DIV); 350 ns (20 mV – 100 V/Div) |
Sweep | 500 ms/Div – 2 µs/Div, ±5% (magnified or unmagnified) |
Batteries | 2 × “D” NiCd cells |
Operating time | 3.5 hours typical at maximum intensity after full charge cycle |
Charge time | 16 h |
Mains power | 90 – 136 VAC. 48 – 62 Hz (Option 1: 180 – 250 VDC. or 180 – 250 VAC, 48 – 62 Hz) |
Power consumption | Less than 8 watts |
Links
Internals
The 213 makes use of two Tek-made custom chips, the 155-0048-01 trigger sweep circuit, and the 155-0114-00 7-segment character generator in the DVM circuit. In addition, it includes some standard opamps (741, 324) and a 4-digit decimal counter (Mostek MK5007).
Pictures
-
Tek 213 front
-
In DMM mode
-
213 with pouch
-
right side
-
without covers, bottom/left
-
without covers, left
-
without covers, top
-
without covers, operating, top/right
-
Plastic case halves
-
Original battery, corroded
-
-
-
In DMM mode
-
-
In scope mode
-
-
Catalog image, front
-
Catalog image, side
Schematics
-
Attenuator and Input Amplifier Schematic
-
GM and RMS Converter Schematic
-
Battery Charger and Power Supply Schematic
-
HV and CRT Schematic
-
A-D Converter and Character Generator Schematic