P6022

The Tektronix P6022 is a 50-turn AC current probe for oscilloscopes. It can be used with the included passive termination box (011-0106-00), a type 134 current probe amplifier, or a 3A9 or 7A14 current probe amplifier scope plug-in.

P6022, 6 A / 200 MHz current probe

Bandwidth is at least 200 MHz with the passive termination.

The sister model P6021 has lower bandwidth but also a lower LF cut-off frequency and higher peak current rating.

Specifications

	P6021 passive	P6021 + 134	P6021 + 7A14	P6022 passive	P6022 + 134	P6022 + 7A14
Sensitivity	2 mA/mV or 10 mA/mV	1 mA/Div to 1 A/Div (scope @ 50 mV/Div)	1 mA/Div to 1 A/Div	1 mA/mV or 10 mA/mV	1 mA/Div to 1 A/Div (scope @ 50 mV/Div)	1 mA/Div to 1 A/Div
Bandwidth (-3 dB)	60 MHz @ 10 mA/mV	> 40 MHz	50 MHz	200 MHz @ 10 mA/mV	> 70 MHz	105 MHz
LF limit (-3 dB)	450 Hz @ 2 mA/mV 120 Hz @ 10 mA/mV	< 12 Hz	25 Hz	8500 Hz @ 1 mA/mV 935 Hz @ 10 mA/mV	< 100 Hz	250 Hz
Maximum current	15 Ap-p			6 Ap-p (> 10 kHz @ 1 mV/mA, > 3 kHz @ 10 mV/mA, < 10 MHz)

Manuals

• P6022 Service manual (PDF) with termination schematics
• Tektronix P6022 Manual (PDF), newer version without schematics

Prices

Year	1970	1974	1986
Catalog price	$165	$175	$475
2017 value	$1,040	$870	$1,060

Pictures

• 

  P6022 current probe with passive terminator 011-0106-00

• 
• 

  Schematic (click to enlarge)

Comparison of P6022 with passive termination @ 10 mA/Div (top trace) vs. P6021+134 (bottom trace). Signal is a sawtooth from a HP3325A @ 5 V_p-p into 50 Ω = 100 mA_p-p.

• 

  100 Hz

• 

  1 kHz

• 

  10 kHz