464

The Tektronix 464 is a portable 100 MHz dual-trace CRT storage scope with dual time bases. It is a lower cost version of the 466, with a slower writing speed and without the reduced scan feature. The 464 has a linear power supply.

Tektronix 464
Portable 100 MHz dual-trace storage scope Tektronix 464 front Produced from 1975 to 1985 Manuals Tektronix 464 Manual (PDF) Tektronix 464 Schematics (PDF, color) Tektronix 464 Manual (PDF, OCR) Tektronix 464 Schematics (PDF, color, OCR, bad-OCR) Modification: U3165 Replacement (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The optional DM44 multimeter attaches to the top of the instrument.

Specifications

please add

Internals

The vertical signal path of the 464 starts with a rotary cam-operated compensated attenuator. Next is a source-follower made with a 2N5911 dual JFET, part number 151-1032-00. Next is a discrete BJT-based preamp followed by diode-based channel switching and delay driver. The final vertical amplifier, U464, is the 155-0155-00. The 155-0077-01 is listed as an alternative part for U464.

Triggering in the 464 is done using STD704 4.7 mA 18 pF tunnel diodes, part number 152-0125-00 or 152-0125-01. The trigger amplifier is made of discrete BJTs and a 155-0032-01 amplifier IC, presumably an improved version of the 155-0032-00.

The horizontal amplifier is made of discrete BJTs.

Serial numbers B010100 through B079999 use the 154-0722-00 CRT. Serial numbers B080000 and up use the 154-0749-00 CRT.

Links

Pictures

internal view
internal view
internal view
internal view
internal view
internal view