PG506

The Tektronix PG506 is a 1 MHz calibration generator plug-in for the TM500 system.

Tektronix PG506
1 MHz calibration generator Tektronix PG506 Produced from 1974 to 1993 Manuals PG506 Tektronix PG506 Manual for sn 39999 and below (OCR) Tektronix PG506 Instruction Manual SN 40000+ (whole schematics, OCR) PG506A Tektronix PG506A Instruction Manual (All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

It functionally replaces the 067-0502-01 in the "standard amplitude" mode, and the 106 in the "fast rise" and "high amplitude" modes.

There are (at least) two versions of the PG506. The older version has two relays that switch a low-pass (noise) filter into the 10 V and below ranges. The new version just has a capacitor across the output for these ranges.

Common failure modes: In case of low or no output on the 20 V and above ranges, check Q270, Q280 and Q290.