TekWiki

TDS680

Revision as of 08:56, 17 October 2022 by Peter (talk | contribs)

The Tektronix TDS680 is a 1 GHz, 5 GS/s 2-channel digital storage scope with a monochrome screen.
Two plus Two channel operation allows up to two of the four channels to be displayed simultaneously.
Channels not displayed can be used to couple a triggering signal to the oscilloscope.

Tektronix TDS680
1 GHz, 5 GS/s digital scope
TDS680B Single Shot

Produced from (?) to (?)

Manuals

TDS680B

TDS680C

Common

(All manuals in PDF format unless noted otherwise)

Key Specifications

Bandwidth 1 GHz at 10 mv/div and above; 750 MHz @ 5 mV/div; 600 MHz @ 2 mV/div; 500 MHz @ 1 mV/div
Sample rate 1 or 2 channels @ 5 GS/s
Number of Channels 2 + 2
Vertical Sensitivity 1 mV to 10 V/div with calibrated fine adjustment
Resolution 8 bit
Time Base Range 200 ps to 10 s/div
Record length 15k samples per channel
Acquisition modes sample, envelope, average, high-resolution, peak-detect
Display Monochrome
Trigger modes Edge, logic, pulse; Video trigger with option 05 (NTSC, SECAM, PAL, HDTV, and FlexFormat)
Storage 1.44 Mbyte, 3.5 inch, DOS 3.3-or-later floppy disk. NVRAM storage for saving waveforms, hardcopies, and setups. Units with option HD present (requires additional hardware) have a hard disk drive
I/O Full GPIB programmability
Hardcopy Using GPIB, RS-232, or Centronics ports

Software


Firmware

Pictures

  •  

    TDS680B Front

  •  

    TDS680C Front

  •  

    S-52 Single Shot

  •  

    Option 05 Internal Parts

  •  

    Option HD Internal Parts, 2.5" Disk Version

  •  

    Option HD Internal Parts, PCMCIA Disk Version

Retrieved from "https://w140.com/tekwiki/index.php?title=TDS680&oldid=78301"