P6406: Difference between revisions

P6406 (view source)

192 bytes added , 5 June 2017

no edit summary

39,764

edits

@@ Line 2: / Line 2: @@
 The '''Tektronix P6406''' is a 16-channel word recognizer probe for the [[308]] logic analyzer.
-It uses the [[012-0747-00]] cable harness to connect to the data source, like the [[P6451]].
+Input lead sets (same as for the [[P6451]]):
+* [[012-0747-00]] - standard 10-wire 25 cm with pluggable probe tips
+* 012-0655-01 - ten individual 40 cm leads
+* 012-0655-02 - ten individual 8 cm leads
+* 012-0670-00 - ten individual 16 cm leads
+* 012-0800-00 - 10-wire 10 cm
-The probe-side input connector is a standard .65 mm pin header on a 0.2" (5.08 mm) pitch so it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
+The probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch so it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
 ==Internals==