39,728
edits
7A42: Difference between revisions
no edit summary
No edit summary |
No edit summary |
||
| Line 68: | Line 68: | ||
The 7A42's functions are controlled by an [[Intel 8085]]A microprocessor, with code in three 2764 EPROMs (a fourth ROM socket is unused). The front-panel pushbuttons are handled by an Intel 8279 keyboard controller. | The 7A42's functions are controlled by an [[Intel 8085]]A microprocessor, with code in three 2764 EPROMs (a fourth ROM socket is unused). The front-panel pushbuttons are handled by an Intel 8279 keyboard controller. | ||
Each of the four [[119-1517-00]] input attenuator modules contains five [[148-0145-00|148-0145-00 miniature bi-stable relay actuators]]. These have four long pins plugging in to the base board | Each of the four [[119-1517-00]] input attenuator modules contains five [[148-0145-00|148-0145-00 miniature bi-stable relay actuators]]. These have four long pins plugging in to the base board, driving two solenoids that move aa yoke which is held in the last active position by a permanent magnet. The yoke moves a pair of contact springs that directly short corresponding pads on the thick-film ceramic substrate. The relay coils are wired in a 4×5 matrix. | ||
The 7A42 contains its own switch mode PSU, based on an SG3524 controller, that generates +5 V, −2 V and −5 V from the mainframe's ±50 V rails. | The 7A42 contains its own switch mode PSU, based on an SG3524 controller, that generates +5 V, −2 V and −5 V from the mainframe's ±50 V rails. | ||