2465

Tektronix 2465

Portable 150/300 MHz 4-ch scope

Produced from 1984 to (?)

Manuals

2445/2465 Quick Start Reference Guide (OCR PDF, 2.5M)
2445 Service (OCR PDF, 27M)
2445 Operator (OCR PDF, 17M)
2465 Service (PDF, 29M)
2465 Service + changes (OCR PDF, 20M)
2465 Operator (OCR PDF, 22M)
Opt.01 DMM Service (OCR PDF, 11M)
24x5 Rack-mount Kit (OCR PDF, 6M)
Opt.05 TV Operator
Opt.05 TV Service
Opt.06 Opt.09 CTT/WR Operator
Opt.06 Opt.09 CTT/WR Service
Opt.10 GPIB Operator (OCR PDF, 9M)
Opt.10 GPIB Service (OCR PDF, 23M)
Tektronix 2445/2465/2467 Buffer Test Kit (PDF, needs OCR)

(All manuals in PDF format unless noted otherwise)

Manuals – Specifications – Links – Pictures

The Tektronix 2465 is a four-channel 300 MHz portable oscilloscope from the penultimate generation of analog Tektronix scopes. The 2445 is a 150 MHz version.

Wink Gross was the vertical system engineer for the 2465. He designed the 2465 main vertical amplifier, the channel switch, and the auxiliary input preamp. Marv LaVoie designed the 2465 attenuator. The horizontal amplifier in the 2465 was designed by Art Metz and Ken Schlotzhauer (trigger IC). Art Metz also worked on the triggers. He and Walt Ainsworth designed the sweeps. Mike Metcalf designed the 2465 Z axis IC, both under the direction of Art Metz. Art had horizontal system responsibility and designed the non-IC part of the horizontal as well.

Options

Option 01 (DMM) added a 4½-digit, fully autoranging digital multimeter which measures DC and AC voltage and current, resistance, dBV, dBm, continuity, and temperature.
Option 05 (TV) added TV (back-porch) clamp circuitry to the Channel 2 input and TV trigger coupling modes, allowing selection of either horizontal or vertical sync pulses to obtain horizontal-line-sync or field-sync pulse triggering.
Option 06 (Counter/Timer/Trigger) allows precision time-interval measurement, event and frequency counting, delay-by-events triggering, and logic triggering.
Option 09 added option 06, the CTT, plus a 17-bit P6407 word recognizer probe.
Option 10 added a GPIB interface for remote control.

Key Specifications

	— 2445 —
Bandwidth	150 MHz
	— 2465 —
Bandwidth	350 MHz
	— Common —
Sweep Rate	500 ps/div
Channels	Four independent channels
Vertical	2 mV/div vertical sensitivity
Cursors	Delta Volts and Delta Time Cursors
CRT Readout	Scale Factors, Trigger Level, Voltage, Time, Frequency, Phase and Ratio Measurements and Mode Indicators
Trigger	Advanced Triggering with "Hands Off" Auto Level Triggering
Trigger Bandwidth	500 MHz min.
Input Impedance	50 Ω/1 MΩ inputs with 50 Ω protection
CRT	154-0850-01
Probes	Two P6131 ×10 probes, 1.3 m