183: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
The Tektronix 183 is | [[File:Tek 183a front.JPG | thumb | 300px | right | Tektronix 183A]] | ||
The '''Tektronix 183''' is a rotational analyzer for use with the [[182|182 angle-encoding transducer]]. | |||
The 183B appears in the 1961 catalog. | |||
The Tektronix 182A and 183A were furnished as a set, since the calibration of the 182A was part | The Tektronix 182A and 183A were furnished as a set, since the calibration of the 182A was part | ||
of the 183A. This was changed in the 182B and 183B series, so the 182B rotational | of the 183A. This was changed in the 182B and 183B series, so the 182B rotational transducer | ||
and the 183B rotational analyzer were completely interchangeable. Consequently, "A" series and | and the 183B rotational analyzer were completely interchangeable. Consequently, "A" series and | ||
"B" series models may not be mixed. | "B" series models may not be mixed. | ||
The cable between the 182 and 183 uses [[Amphenol 165 series connectors]]. The 183's outputs are via [[UHF connector]]s. | |||
==Manuals== | |||
* [http://w140.com/tek_rotan_system_in_1961_catalog.pdf Tektronix Rotan System 182B/183B in 1961 Catalog (PDF)] | * [http://w140.com/tek_rotan_system_in_1961_catalog.pdf Tektronix Rotan System 182B/183B in 1961 Catalog (PDF)] | ||
* [[media:070-320.pdf | 182B/183B Photo-Rotational Analyzer Manual (PDF)]] | |||
{{MissingSpecs}} | |||
==Pictures== | |||
<gallery> | <gallery> | ||
Tek 183a front.JPG | |||
Tek 183a left.JPG | |||
Tek 183a right.JPG | |||
Tek 183a panel rear.JPG | |||
Tek rotan 62 cat.jpg | |||
</gallery> | </gallery> | ||
| Line 22: | Line 31: | ||
[[Category: | [[Category:Introduced in 1961]] | ||
[[Category:Manual needed]] | [[Category:Manual needed]] | ||
Revision as of 10:14, 22 February 2018
The Tektronix 183 is a rotational analyzer for use with the 182 angle-encoding transducer. The 183B appears in the 1961 catalog.
The Tektronix 182A and 183A were furnished as a set, since the calibration of the 182A was part of the 183A. This was changed in the 182B and 183B series, so the 182B rotational transducer and the 183B rotational analyzer were completely interchangeable. Consequently, "A" series and "B" series models may not be mixed.
The cable between the 182 and 183 uses Amphenol 165 series connectors. The 183's outputs are via UHF connectors.
Manuals
- Tektronix Rotan System 182B/183B in 1961 Catalog (PDF)
- 182B/183B Photo-Rotational Analyzer Manual (PDF)
Key Specifications
- please add
