2641: Difference between revisions

← Older edit

2641 (view source)

Revision as of 04:22, 11 September 2023

672 bytes removed , 11 September 2023

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

36,682

edits

@@ Line 17: / Line 17: @@
 Each of the channel inputs provide simultaneous sampling of all channels utilizing 12 bit ADC standard or 16 bit ADC optionally.
-Signal processing includes Fourier Transform (FFT) and Spectral Lines.
+Signal processing includes Fourier Transform ([[wikipedia:Fast_Fourier_transform|FFT]]) and Spectral Lines.
-The signal generator has a wide variety of functions, like sine, square, sawtooth, triangle, input, random, adjustable random, chirp, and arbitrary.
+The signal generator has a wide variety of functions, like sine, square, sawtooth, triangle, input, random, adjustable random, chirp, and arbitrary.   With the optional TurboPac Application Library and Run-Time License advanced measurement calculations and graphs can be generated from the data collected.
-With the optional TurboPac Application Library and Run-Time License advanced measurement calculations and graphs can be generated from the data collected.
 The PC’s monitor displays the measurements results – but that’s where the Fourier Analyzer dependence on the PC stops.
@@ Line 29: / Line 28: @@
 It allows one to focus up to 1600 spectral line with a span as small as 10 Hz about the frequency of interest.
-To learn more about FFT read '''[[wikipedia:Fast_Fourier_transform|Fast Fourier transform]]''' on at https://en.wikipedia.org/wiki/Fast_Fourier_transform.
-Front panel inputs/outputs are: CH1, CH2, CH3, and CH4 each with a [[BNC connector]] (1 MΩ; 200 pF; ±30 V);
-and OUTPUT [[BNC connector]] (50Ω; ±10 V; signal general output capable of a variety of pre-defined, as well as user-defined, signals.)
-Rear panel inputs/outputs are: SYSTEM INTERCONNECT [[DB9 connector]] (Male connector used for both External triggering, and External sampling inputs.
-All pins TTL-level except Signal ground: Pin 1 triggering signal input; pin 2 trigger sense output; pin 3 external clock input; pins 6 thru 8 signal ground;
-pin 9 is the external sampling input); and SERIAL PORT [[BNC connector]] (Female connector used linking to the host computer via a Tektronix supplied serial interface cable).
----------------------------------------------------------
-<div style='text-align: center;'>Specifications based on 1991 published documentation, unless otherwise specified.</div>
 {{BeginSpecs}}
 {{Spec | Frequency Ranges | DC to 100 kHz }}
@@ Line 51: / Line 39: @@
 {{Spec | Input Impedance | 1 MΩ; 200 pF }}
 {{Spec | Max Input Level | ±30 V }}
-{{Spec | Included Accessories | User Guide; Instrument Program Software; [[System Simulator]] Box; Power Cord; and Serial Interface Cable (please specify) }}
 {{Spec | Weight | Standard accessories: 11.8 kg (26 lbs) }}
 {{Spec | Power | 90 − 250 V<sub>AC</sub>, 48 to 66 Hz, >120 W }}
-{{Spec | Operating Atmospherics | Temperatures: 0 °C to +50 °C; Humidity: 95% for five days; Altitude: Up to 4.8 km (15,000 ft) }}
 {{EndSpecs}}
+Front panel:
+* CH1, CH2, CH3, and CH4 each with a [[BNC connector]] (1 MΩ; 200 pF; ±30 V);
+* OUTPUT [[BNC connector]] (50 Ω; ±10 V; signal general output capable of a variety of pre-defined, as well as user-defined, signals.)
+Rear panel:
+* SYSTEM INTERCONNECT [[DB9 connector|DB-9 male]] used for both External triggering, and External sampling inputs.
+All pins TTL-level: Pin 1 triggering signal input; pin 2 trigger sense output; pin 3 external clock input; pins 6 thru 8 signal ground;
+pin 9 is the external sampling input);
+* SERIAL PORT [[BNC connector]] (linking to the host computer via a Tektronix supplied serial interface cable).
 ==Options==