36,239
edits
mNo edit summary |
No edit summary |
||
Line 18: | Line 18: | ||
The '''Tektronix 2707''' is an external Tracking Generator for use with the [[2711]], [[2712]], [[2714]], and [[2715]] Spectrum Analyzers. | The '''Tektronix 2707''' is an external Tracking Generator for use with the [[2711]], [[2712]], [[2714]], and [[2715]] Spectrum Analyzers. | ||
The Tektronix 2707 Tracking Generator is used to characterize filters, test duplexers and cables, measure frequency response, SWR measurements (with a return-loss bridge), and EMI site attenuation tests. The 2707 performs swept measurements from 100 Hz to 1.8 GHz with output from | The Tektronix 2707 Tracking Generator is used to characterize filters, test duplexers and cables, measure frequency response, SWR measurements (with a return-loss bridge), and EMI site attenuation tests. The 2707 performs swept measurements from 100 Hz to 1.8 GHz with output from –48 dBm to 0 dBm (–1.2 dBmV to 46.8 dBmV) in 0.1 dB Steps and at least 100 dB dynamic range to see filter, ultimate rejection, or circuit isolation characteristics. | ||
The 2707 Tracking Generator connects to 271X spectrum analyzers equipped with factory Option 15 | The 2707 Tracking Generator connects to 271X spectrum analyzers equipped with factory Option 15, which provides a rear panel SMA-F and a female DE15 (three-row, 15-pin) connector, using a single LO coax cable and one 15-pin interconnection control cable. | ||
2711s, 2712s, and 2714s ordered without Option 07 or Option 15 have a female DB9 nine pin rear panel connector and will not work with the external 2707 Tracking Generator. | |||
In the 2715, Tektronix replaced the DB9 with a female DE15, but these instruments do not have the SMA-F connector unless Opt. 15 is installed. | |||
2707 External Tracking Generators with Option 01 have a 75 Ω output for use with [[2714]] and [[2715]] 75 Ω analyzers. | |||
{{BeginSpecs}}[[2714]] | {{BeginSpecs}}[[2714]] |