317: Difference between revisions

{{Oscilloscope Sidebar  

|manufacturer=Tektronix

|model=317  

|summary=10 MHz 3" tube scope

|image=Tek 317 trace bright.jpg

|caption=Tek 317  

|introduced=1959  

|discontinued=1972  

|designers=

|manuals=

* [[Media:070-297.pdf|Tektronix Type 317 Manual]]<br /><small>[https://bama.edebris.com/manuals/tek/317/ Tektronix 317 Manual] (DJVU @ BAMA)</small>

* [[Media:070-325.pdf|Tektronix RM17 Manual]]

 

* [[Media:tek_317_fcp.pdf|Tektronix 317 Factory Calibration Procedure]] (OCR)

* [[Media:Tek 317 fcp dec 1968.pdf|Tektronix 317 Factory Calibration Procedure, Dec. 1968]]

* [[Media:tek_317_irb.pdf|Tektronix 317 Instrument Reference Book]] (OCR)

The '''Tektronix 317''', [[introduced in 1959]], is a monolithic 10 MHz scope similar to the [[316]], but with higher acceleration voltage (9 kV versus 1.8 kV) on the CRT.

It was intended for use where a bright display is needed. There is also a rackmount version, the '''RM17'''.

The 317 initially used [[UHF connector]]s for the signal input and calibrator output; later units use [[BNC connector]]s.

Type 317 Mod 101 operates on 50 to 400 Hz power and uses a DC fan motor.  

{{Spec | Deflection | 0.1 V/div to 50 V/div, 1−2−5, and variable }}

{{Spec | Bandwidth | DC to 10 MHz (50/20/10 mV/div AC only) }}

{{Spec | Rise time | 35 ns }}

{{Spec | Input impedance | 1 MΩ // 38 pF }}

{{Spec | Sweep | 200 ns/div to 2 s/div, 1−2−5, and variable }}