442: Difference between revisions
Jump to navigation
Jump to search
(template, img) |
No edit summary |
||
| Line 27: | Line 27: | ||
a 74S00 TTL quad NAND gate configured as a flip-flop. | a 74S00 TTL quad NAND gate configured as a flip-flop. | ||
The power supply is linear and regulated using | The power supply is linear and regulated using op amps as error amplifiers. | ||
The vertical and horizontal amplifiers are made of discrete bipolar transistors | The vertical and horizontal amplifiers are made of discrete bipolar transistors | ||
Revision as of 14:16, 24 December 2014
The Tektronix 442 is a 35 MHz dual-trace oscilloscope with a single timebase.
Specifications
please add
The anode voltage on the CRT is 10kV and the standard phosphor was P31.
A Tektronix 442 consumes 36 watts and weighs about 20 pounds.
Internals
Serials numbers from B010100 to B010786 use the 154-0729-00 CRT. Starting with serial number B010787, the 154-0804-00 CRT is used.
Triggering is done using a trigger amplifier made of discrete bipolar transistors and a 74S00 TTL quad NAND gate configured as a flip-flop.
The power supply is linear and regulated using op amps as error amplifiers.
The vertical and horizontal amplifiers are made of discrete bipolar transistors except for the dual-JFETs that are used as high-impedance buffers at the signal inputs.
