536: Difference between revisions

← Older edit

536 (view source)

Revision as of 07:57, 6 December 2023

40 bytes added , 6 December 2023

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

36,479

edits

@@ Line 1: / Line 1: @@
-{{Oscilloscope Sidebar |
+{{Oscilloscope Sidebar
-title=Tektronix 536 |
+|manufacturer=Tektronix
-summary=11 MHz X-Y scope |
+|series=500-series scopes
-image=Tek 536 front fl.jpg |
+|model=536
-caption=Tektronix 536 front |
+|summary=11 MHz X–Y oscilloscope
-introduced=1957 |
+|image=Tek 536 front fl.jpg
-discontinued=1972 |
+|caption=Tektronix 536 front with [[G|Type G]] and [[T|Type T]] plug-ins
-manuals=
+|introduced=1957
-* [http://bama.edebris.com/manuals/tek/536 Tektronix 536 Manual (1961 edition, PDF)]
+|discontinued=1973
-* [http://w140.com/Tektronix_536_Oscilloscope_Manual_Dec1970_070-0270-01.pdf Tektronix 536 Manual (1970 edition, PDF)]
+|designers=
-* [http://w140.com/tek_fcp/tek_type_536_early_factory_cal_proc.pdf Tektronix 536 Factory Calibration Procedure low-sn (PDF)]
+|manuals=
-* [http://w140.com/tek_fcp/tek_type_536_late_factory_cal_proc.pdf Tektronix 536 Factory Calibration Procedure high-sn (PDF)]
+* [[Media:070-270.pdf | Tektronix 536 Manual, 1961]] (OCR)
+* [[Media:070-0270-01.pdf | Tektronix 536 Manual, 1970]] (OCR)
+* [[Media:Tek_536_fcp.pdf | Tektronix 536 Factory Calibration Procedure low-sn]] (OCR)
+* [[Media:Tek_536_fcp_high-sn.pdf | Tektronix 536 Factory Calibration Procedure high-sn]] (OCR)
+* [[Media:Tek 536 cal outline.pdf]]
 }}
+The '''Tektronix Type 536''' is an X-Y scope [[introduced in 1957]] that takes two [[letter-series and 1-series plug-ins]], one for the horizontal axis and one for the vertical axis.
-The '''Tektronix Type 536''' is an X-Y scope [[introduced in 1957]]
-that takes two [[letter-series and 1-series plug-ins]],
-one for the horizontal axis and one for the vertical axis.
 The Type 536 does not contain trigger and sweep circuitry.
-In case a 536 is to be used as a conventional oscilloscope,
+To use a 536 as a conventional oscilloscope, a [[T|Type T timebase plug-in]] can be installed in the Horizontal bay.
-a the [[T|Type T]] timebase plug-in is available.
-The 536 contains identical vertical and horizontal amplifiers, with a front panel control to set the two in phase. This allows an equal bandwidth of 11 MHz in both directions. It also has a special CRT with equal bandwidths in both directions. Aside from the amplifiers, the only other circuitry in the entire scope are the power supplies and calibrator.
+The 536 contains identical vertical and horizontal amplifiers, with a front panel control to set the two in phase.
+This allows an equal bandwidth of 11 MHz in both directions.
+It also has a special CRT ([[T5360]]) with equal bandwidths in both directions.
+Aside from the amplifiers, the only other circuitry in the entire scope are the power supplies and calibrator.
-==Specifications==
+{{MissingSpecs}}
-[[Category:Specifications needed]] ''please add''
 ==Pictures==
@@ Line 48: / Line 49: @@
 Tek 536 ca t.jpg|536 with [[CA|Type CA]] and [[T|Type T]]
 Tek 536 right internal2.jpg|right internal
+Tek 536 2017 1.jpg
+Tek 536 2017 2.jpg
+Tek 536 2017 3.jpg
 </gallery>
+==Components==
+{{Parts|536}}
 [[Category:500 series scopes]]