AA501: Difference between revisions
No edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
{{TM500 | mfg=Tektronix | type=AA501 | function=audio analyzer | class=filter | image=Tektronix-AA501-front.jpg | introduced=1980 | discontinued=(?) | {{TM500 | mfg=Tektronix | type=AA501 | function=audio analyzer | class=filter | image=Tektronix-AA501-front.jpg | introduced=1980 | discontinued=(?) | an=an | ||
|designers=Bruce Hofer | |designers=Bruce Hofer | ||
|manuals= | |manuals= | ||
Revision as of 13:49, 26 December 2021
The Tektronix AA501 is an audio analyzer plug-in for the TM500 system.
It provides automated measurement of THD+N and levels (RMS responding) in the range of 10 Hz to 100 kHz. Harmonics are measured up to 300 kHz. It has four built-in weighting filters and allows the user to loop an external filter in. Option 01 adds intermodulation measurement. Input impedance is 100 kΩ unlike other analyzers with usually 1 MΩ or near-infinite input impedance. Internal THD in the audio band is specified as typically <−95 dB (0.0018 %). Residual THD+N is specified as <−90 dB (<0.0032 %).
It was one of the first, if not the first, audio analyzers capable of fully automatic measurements without requiring manual reference level setting, range selection or frequency fine-tuning. It is ideally combined with the SG505 low distortion oscillator.
The AA501 is two slots wide.
Key Specifications
- please add
Links
- Bruce Hofer, Automatic Distortion Analyzer Speeds Distortion Measurements in Tekscope V.12 No.3 1980 p.14+
- Zenwizard Studios - AA501 Calibration and Alignment
- Zenwizard Studios - AA501A Repair
- Zenwizard Studios - AA501A Calibration and Alignment
Pictures
-
-
Measuring distortion of an SG502
-
Measuring distortion of an HP239A
