P6040: Difference between revisions

← Older edit

P6040 (view source)

Revision as of 21:02, 29 November 2023

503 bytes added , 29 November 2023

add photos, specs.

Jadney

1,325

edits

@@ Line 15: / Line 15: @@
 The '''Tektronix P6040/CT-1''' is a 35 kHz – 1 GHz current probe intended for sampling scopes.
-The P6040 is an 18", 50 Ω cable with a [[GR-874 connector]] for the scope end (e.g. [[S-1]], [[3S6]]) and an SMB connector on the other end to connect to one of possibly several [[CT-1]] transformers installed in a circuit to be tested.
+* '''015-0041-00''' is the part number for the CT-1/P6040 combination
+* '''010-0133-00''' is the part number for the P6040 alone
+* '''015-0040-00''' is the part number for the CT-1 alone
-{{BeginSpecs}}
+The P6040 is an 18", 50 Ω cable with a [[GR-874 connector]] for the scope end (e.g. [[S-1]], [[3S6]]) and an [[SMB]] connector on the other end to connect to one of possibly several [[CT-1]] transformers installed in a circuit to be tested.
+{{BeginSpecs}} for the CT-1
 {{Spec | Sensitivity | 5 mV/mA into 50 Ω }}
 {{Spec | Rise time | <350 ps }}
 {{Spec | Frequency response | 35 kHz to 1 GHz (-30%) }}
-{{Spec | Max. current | 500 mA RMS, 100 A peak }}
+{{Spec | Max. current | 500 mA<sub>RMS</sub>, 100 A peak }}
+{{Spec | Input Aperture | ≥0.065" (1.6 mm) }}
+{{Spec | Voltage Rating | 1000 V }}
+{{Spec | Insertion Impedance | Terminated: 1 Ω // 5 μH, Un-terminated: 2 Ω // 5 μH }}
+{{Spec | Capacitive Loading | 0.5 to 1.5 pF }}
 {{EndSpecs}}
@@ Line 37: / Line 45: @@
 Tek_CT-1_4.jpg
 P6040-CT1.jpg
+Tek 015-040 1.JPG | Early CT-1
+Tek 015-040 2.JPG | Early CT-1
 </gallery>
 [[Category:Oscilloscope current probes]]