1,341
edits
P6040: Difference between revisions
Jump to navigation
Jump to search
add photos, specs.
No edit summary |
(add photos, specs.) |
||
| Line 15: | Line 15: | ||
The '''Tektronix P6040/CT-1''' is a 35 kHz – 1 GHz current probe intended for sampling scopes. | The '''Tektronix P6040/CT-1''' is a 35 kHz – 1 GHz current probe intended for sampling scopes. | ||
* '''015-0041-00''' is the part number for the CT-1/P6040 combination | |||
* '''010-0133-00''' is the part number for the P6040 alone | |||
* '''015-0040-00''' is the part number for the CT-1 alone | |||
{{BeginSpecs}} | The P6040 is an 18", 50 Ω cable with a [[GR-874 connector]] for the scope end (e.g. [[S-1]], [[3S6]]) and an [[SMB]] connector on the other end to connect to one of possibly several [[CT-1]] transformers installed in a circuit to be tested. | ||
{{BeginSpecs}} for the CT-1 | |||
{{Spec | Sensitivity | 5 mV/mA into 50 Ω }} | {{Spec | Sensitivity | 5 mV/mA into 50 Ω }} | ||
{{Spec | Rise time | <350 ps }} | {{Spec | Rise time | <350 ps }} | ||
{{Spec | Frequency response | 35 kHz to 1 GHz (-30%) }} | {{Spec | Frequency response | 35 kHz to 1 GHz (-30%) }} | ||
{{Spec | Max. current | 500 mA RMS, 100 A peak }} | {{Spec | Max. current | 500 mA<sub>RMS</sub>, 100 A peak }} | ||
{{Spec | Input Aperture | ≥0.065" (1.6 mm) }} | |||
{{Spec | Voltage Rating | 1000 V }} | |||
{{Spec | Insertion Impedance | Terminated: 1 Ω // 5 μH, Un-terminated: 2 Ω // 5 μH }} | |||
{{Spec | Capacitive Loading | 0.5 to 1.5 pF }} | |||
{{EndSpecs}} | {{EndSpecs}} | ||
| Line 37: | Line 45: | ||
Tek_CT-1_4.jpg | Tek_CT-1_4.jpg | ||
P6040-CT1.jpg | P6040-CT1.jpg | ||
Tek 015-040 1.JPG | Early CT-1 | |||
Tek 015-040 2.JPG | Early CT-1 | |||
</gallery> | </gallery> | ||
[[Category:Oscilloscope current probes]] | [[Category:Oscilloscope current probes]] | ||