36,375
edits
P6407: Difference between revisions
no edit summary
(new in 1987 catalog) |
No edit summary |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{Probe Sidebar | |||
The '''Tektronix P6407''' is a 17-bit Word Recognizer Probe for the [[2445]] Opt. 09, [[2465]] Opt. 09, [[2430A]] Opt. 03, [[2432A]] Opt. 03 and [[2440]] Opt. 03 scopes | |manufacturer=Tektronix | ||
|model=P6407 | |||
|summary=Word recognizer probe | |||
|image=P6407.jpg | |||
|caption=Tektronix P6407 | |||
|for=2430A 2432A 2440 2445 | |||
|introduced=(?) | |||
|discontinued=(?) | |||
|manuals= | |||
* [[Media:070-5582-00.pdf|Tektronix P6407 Manual]] (complete) | |||
* [https://w140.com/P6407_11x17.pdf Tektronix P6407 Manual 11x17 Pages Only] | |||
* [https://w140.com/P6407_8.5x11.pdf Tektronix P6407 Manual 8.5x11 Pages Only] | |||
}} | |||
The '''Tektronix P6407''' is a 17-bit Word Recognizer Probe for the [[2445]] Opt. 09, [[2465]] Opt. 09, [[2430A]] Opt. 03, [[2432A]] Opt. 03 and [[2440]] Opt. 03 scopes. | |||
The P6407 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. | It connects to the scope through a 6-pin [[LEMO S-series connector]] on the rear panel. | ||
The P6407 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors. It is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs. | |||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Input voltage | −0.5 V to 5.5 V Peak max. }} | {{Spec | Input voltage | −0.5 V to 5.5 V Peak max. }} | ||
{{Spec | Input current | 20 μA max. at 2.7 V, 0.6 mA max. at 0.5 V }} | {{Spec | Input current | 20 μA max. at 2.7 V, 0.6 mA max. at 0.5 V }} | ||
{{Spec | Speed | Up to 10 MHz without | {{Spec | Speed | Up to 10 MHz without external clock, 20 MHz with external clock}} | ||
{{Spec | Features | 17-bit, TTL Compatible}} | {{Spec | Features | 17-bit, TTL Compatible}} | ||
{{EndSpecs}} | {{EndSpecs}} | ||
| Line 15: | Line 30: | ||
The scope sends configuration data (compare and don't care bits) through a shift register made from five 74C164s, similar to the [[P6406]]. | The scope sends configuration data (compare and don't care bits) through a shift register made from five 74C164s, similar to the [[P6406]]. | ||
Signal inputs go to 74F00 gates through 300 Ω resistors, 74F521 comparators test the input bits and a 74F02 drives the cable. | Signal inputs go to 74F00 gates through 300 Ω resistors, 74F521 comparators test the input bits and a 74F02 drives the cable. | ||
==Links== | ==Links== | ||