P6407: Difference between revisions

P6407 (view source)

309 bytes removed , 18 September 2017

no edit summary

36,375

edits

@@ Line 2: / Line 2: @@
 The '''Tektronix P6407''' is a 17-bit Word Recognizer Probe for the [[2445]] Opt. 09,  [[2465]] Opt. 09, [[2430A]] Opt. 03, [[2432A]] Opt. 03 and [[2440]] Opt. 03 scopes. It connects to the scope through a 6-pin [[LEMO S-series connector]] on the rear panel.
-Input lead sets (same as for the [[P6451]], [[P6406]], [[P6460]] and others):
+The P6407 uses the [[P64xx input leads|P64xx-family 10-wire input lead harnesses]] with 0.2" connectors.  Is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
-* [[012-0747-00]] - standard 10-wire 25 cm with pluggable probe tips
-* 012-0655-01 - ten individual 40 cm leads
-* 012-0655-02 - ten individual 8 cm leads
-* 012-0670-00 - ten individual 16 cm leads
-* 012-0800-00 - 10-wire 10 cm
-The probe-side input connector is a standard .65 mm square pin header on a 0.2" (5.08 mm) pitch so it is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
 ==Manuals==