Probe power: Difference between revisions

Probe power (view source)

Revision as of 07:55, 24 January 2016

113 bytes added , 24 January 2016

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

36,532

edits

@@ Line 1: / Line 1: @@
 Many Tektronix instruments provide power for active probes.
-There have been several distinct versions of probe power.
+There have been several distinct versions:
 * The [[513]] provides +225 V, +6.3 V, and a variable supply producing +15 V to +150 V.
@@ Line 6: / Line 6: @@
 * The [[3S1]] provides +100 V and -12.2 V.
 * The [[4S1]] provides +100 V, -12.6 V, and -25.2 V.
-* [[7000-series scopes]] (not all models) and the [[1101]] probe supply provide +15 V, +5 V, and -15 V through a [[LEMO S-series connector]].
+* [[7000-series scopes]] (not all models), [[475]], [[485]] and the [[1101]] probe supply provide +15 V, +5 V, and -15 V through a [[LEMO S-series connector]].
-* [[Tekprobe BNC connector|TekProbe]] is a proprietary probe-scope interface that combines signal and probe power and provides the scope with information about the what type of probe is connected.
+* [[Tekprobe BNC connector|TekProbe BNC]], [[Tekprobe SMA connector|TekProbe SMA]] and [[TekConnect interface|TekConnect]] are proprietary probe-scope interfaces that combine signal and probe power as well as control (e.g. offset voltage), and provide the scope with information about the type of probe is connected.
 <gallery>
-File:Tek_7104_probe_power.jpg  | Probe power connector on rear panel of [[7104]]
+Tek_7104_probe_power.jpg  | Probe power connector on rear panel of [[7104]]
-File:Tekprobe 2 interface.png|TekProbe 2 Pinout
+Tekprobe 2 interface.png|TekProbe 2 Pinout
 </gallery>
 [[Category:Oscilloscope Probes]]