6R1: Difference between revisions

Jump to navigation Jump to search
44 bytes removed ,  19 July 2014
manuals
(template)
(manuals)
Line 7: Line 7:
years=?|
years=?|
manuals=
manuals=
* [http://w140.com/tek_6r1_schem.pdf 6R1 Schematics]
* [http://bama.edebris.com/download/tek/6r1/tek%206r1.v6.pdf Tektronix 6R1 Manual (PDF)]
}}
}}
The '''Tektronix Type 6R1''' is a plug-in for the [[567]] oscilloscope.  It was later replaced by the [[6R1A]].   
The '''Tektronix Type 6R1''' is a plug-in for the [[567]] oscilloscope.  It was later replaced by the [[6R1A]].   
The 6R1 provides digital readout of time and voltage measurements
The 6R1 provides digital readout of time and voltage measurements on waveforms.   
on waveforms.  The 6R1 (and the 567 in general) is oriented toward sampling measurements.   
The 6R1 (and the 567 in general) is oriented toward sampling measurements.   
 
The basic building blocks of the 6R1 are a counter and comparators.   
The basic building blocks of the 6R1 are a counter and comparators.   
To digitize analog voltages, the counter and comparator
To digitize analog voltages, the counter and comparator
Line 18: Line 21:
Its functions are implemented using dozens of discrete bipolar transistors,  
Its functions are implemented using dozens of discrete bipolar transistors,  
fourteen vacuum tubes (depending on version), and a few tunnel diodes.   
fourteen vacuum tubes (depending on version), and a few tunnel diodes.   
Most of the digital signals
 
within the 6R1 use 0V to represented a "0" and 20V to represent a "1".   
Most of the digital signals within the 6R1 use 0 V to represente a "0" and 20 V to represent a "1".   
Flip-flops (bistable multivibrators) are implemented in the 6R1 using  
Flip-flops (bistable multivibrators) are implemented in the 6R1 using  
the classic cross-coupled transistor pair.  The counter is composed of  
the classic cross-coupled transistor pair.  The counter is composed of  
several of these flip-flop subcircuits,
several of these flip-flop subcircuits, as are various other state machines in the 6R1.   
as are various other state machines in the 6R1.   
 
All of the active circuitry of the 6R1 is on small plug-in printed circuit boards.   
All of the active circuitry of the 6R1 is on small plug-in printed circuit boards.   
There are twelve different boards labeled A through L.   
There are twelve different boards labeled A through L.   
The 6R1 contains more than one of some of the boards,  
The 6R1 contains more than one of some of the boards, seventeen boards in total.
seventeen boards in total.


The digital display of the Tektronix 6R1 is composed of four [[Burroughs B5092]] Nixie
The digital display of the Tektronix 6R1 is composed of four Burroughs [[B5092]] Nixie
tubes for the digits, and one  
tubes for the digits, and one  
[http://www.tube-tester.com/sites/nixie/data/B-5094/b-5094.htm Burroughs B5094] Nixie tube for the units.
Burroughs [[B5094]] Nixie tube for the units.


*Board A: COUNTER (6R1 has four of these)
*Board A: COUNTER (6R1 has four of these)
Line 254: Line 256:
while the instrument is powered up.
while the instrument is powered up.


 
==Pictures==
* [http://w140.com/tek_6r1_schem.pdf 6R1 Schematics]
* [http://bama.edebris.com/download/tek/6r1/tek%206r1.v6.pdf Tektronix 6R1 Manual (PDF)]
<gallery>
<gallery>
Image:6r1_front.jpg|Front view
Image:6r1_front.jpg|Front view

Navigation menu