S-53: Difference between revisions

Jump to navigation Jump to search
187 bytes added ,  16 August 2014
ref. 285
(ref 7S12)
(ref. 285)
Line 12: Line 12:
* [http://w140.com/tek_s53_sch.png Tektronix S-53 Schematic (PNG)]
* [http://w140.com/tek_s53_sch.png Tektronix S-53 Schematic (PNG)]
}}
}}
The Tektronix S-53 '''Trigger Recognizer''' head for the [[7S12]] TDR/Sampler plug-in is essentially the entire trigger circuit of an oscilloscope.   
The Tektronix S-53 '''Trigger Recognizer''' head can be used in the right bay of the [[7S12]] TDR/Sampler plug-in  
or externally in a type [[285]] enclosure. It essentially contains the entire trigger circuit of an oscilloscope.   


The S-53 uses tunnel diode triggering with an amplifier before the tunnel diode.   
The S-53 uses tunnel diode triggering with an amplifier before the tunnel diode.   
Line 29: Line 30:
{{Spec | Bandwidth | 1 GHz }}
{{Spec | Bandwidth | 1 GHz }}
{{Spec | Input impedance | 50 Ω [[BNC connector]] }}
{{Spec | Input impedance | 50 Ω [[BNC connector]] }}
{{Spec | Sensitivity | 10 mV to 1 V (p-p) }}
{{Spec | Jitter | max. 15 ps or less (from input signal to trigger-out) }}
{{Spec | Jitter | max. 15 ps or less (from input signal to trigger-out) }}
{{Spec | Delay | 15 ns (from input signal to trigger-out) }}
{{Spec | Trigger-out signal | 1 V into 50 Ω with 600 mV/ns slew rate }}
{{Spec | Trigger-out signal | 1 V into 50 Ω with 600 mV/ns slew rate }}
{{EndSpecs}}
{{EndSpecs}}

Navigation menu