39,552
edits
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
The Tektronix 067-0625-00 is a Peak to Peak detector designed | The Tektronix 067-0625-00 is a Peak to Peak detector designed to measure the output voltage flatness of constant amplitude signal generators in the 50 Hz to 500 MHz range. | ||
The input amplitude should be 1. | The input amplitude should be 1.2 V<sub>p-p</sub>. | ||
The input is a [[GR-874 connector]] terminated in 50 | |||
The input is a [[GR-874 connector]] terminated in 50 Ω. | |||
There are two outputs, one for the positive peak voltage and one for the negative peak voltage. | There are two outputs, one for the positive peak voltage and one for the negative peak voltage. | ||
The outputs are [[BNC]] females, intended for connection to high-impedance low-frequency | The outputs are [[BNC]] females, intended for connection to high-impedance low-frequency | ||
instrumentation. | instrumentation. | ||
Up to serial number B003240, the 067-0625-00 used 1. | Up to serial number B003240, the 067-0625-00 used 1.35 V mercury batteries for biasing the detector diodes. | ||
Starting at serial number B003241, 1. | Starting at serial number B003241, 1.5 V alkaline batteries were used. | ||
{{BeginSpecs}} | |||
{{Spec | Sensitivity | 10 ±1 mV/% input change at 1.2 V<sub>p-p</sub> }} | |||
{{Spec | Temperature Range | 23°C ±10°C }} | |||
{{Spec | Output | Into floating 2 MΩ load or differential oscilloscope with 1 MΩ inputs }} | |||
{{EndSpecs}} | |||
==Manuals== | |||
* [http://w140.com/tek_067-0625-00.pdf Tektronix 067-0625-00 Manual (PDF)] | * [http://w140.com/tek_067-0625-00.pdf Tektronix 067-0625-00 Manual (PDF)] | ||
==Pictures== | |||
<gallery> | <gallery> | ||
File:Tek 0625 1.JPG | File:Tek 0625 1.JPG |