Selenium rectifiers: Difference between revisions

Some classic Tek gear uses selenium rectifiers.  It is recommended that these be replaced with modern silicon rectifiers.  The problem is that the original circuits were designed based in the voltage drop exepected across a selenium rectifier, which is much more than the voltage drop across a silicon rectifier.  So simply replacing the selenium part with a silicon part can result in an overvoltage situation.  There are many solutions to this.   

One approach is to add a "dropping resistor" in series with a silicon  

rectifier.  The resistance is selected to have a voltage drop that that compensates for the change in rectifiers.

Another approach is to use several silicon rectifiers in series.   

Another approach is to wire transformers so that their secondaries partially buck the supply, thereby feeding less voltage to the silicon rectifiers so their output matches the voltage in the original design.