37,092
edits
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
[[File:Tek C-50.jpg|thumb|300px|right|C-50 camera]] | |||
The '''Tektronix C-50, C-51, C-52 and C-53''' are oscilloscope cameras primarily targeted toward the [[7000-series scopes]] | The '''Tektronix C-50, C-51, C-52 and C-53''' are oscilloscope cameras primarily targeted toward the [[7000-series scopes]] | ||
but also compatible with other instruments through mounting adapters. The cameras used interchangeable packs for | but also compatible with other instruments through mounting adapters. The cameras used interchangeable packs for | ||
Line 4: | Line 5: | ||
The cameras have a three-pin connector matching the 7000 series camera connectors to t he left of the CRT. | The cameras have a three-pin connector matching the 7000 series camera connectors to t he left of the CRT. | ||
This connector carries | This connector carries 15 V power, Ground, and a sweep reset signal from the camera to the scope. In single sweep mode, | ||
pressing the shutter button on the camera opens the shutter and signals the sweep reset, arming the timebase's sweep; | pressing the shutter button on the camera opens the shutter and signals the sweep reset, arming the timebase's sweep; | ||
the scope's GATE output, connected to the camera's GATE input, closes the shutter 5 seconds after the sweep is complete. | the scope's GATE output, connected to the camera's GATE input, closes the shutter 5 seconds after the sweep is complete. |