8056: Difference between revisions

Jump to navigation Jump to search
7 bytes added ,  11 October 2018
no edit summary
No edit summary
No edit summary
Line 4: Line 4:
It can sometimes be replaced with a [[MPF102]] FET.
It can sometimes be replaced with a [[MPF102]] FET.


The 8056 has a maximum plate-to-cathode voltage of 50V.
The 8056 has a maximum plate-to-cathode voltage of 50 V.
Contrast this with another Nuvistor triode, the [[7586]],
Contrast this with another Nuvistor triode, the [[7586]],
which has a maximum plate-to-cathode voltage of 110V.
which has a maximum plate-to-cathode voltage of 110 V.
 
The 7586 and 8056 have the same pinout,
The 7586 and 8056 have the same pinout,
but the two tubes are not interchangable
but the two tubes are not interchangable
since they have different voltage ratings.
since they have different voltage ratings.
For example, in the front-end cathode followers
For example, in the front-end cathode followers
of the [[3A1]], the plate voltage of the 7586 tubes, V113 and V123, is 55 V,
of the [[3A1]], the plate voltage of the 7586 tubes, V113 and V123, is 55 V,
and possibly a bit higher during warm-up.
and possibly a bit higher during warm-up.
This exceeds the maximum plate voltage of the 8056,
This exceeds the maximum plate voltage of the 8056,
Line 20: Line 22:
* [http://w140.com/8056-siemens1964.pdf Siemens 8056 Datasheet (PDF)]
* [http://w140.com/8056-siemens1964.pdf Siemens 8056 Datasheet (PDF)]
* [http://w140.com/RCA_Nuvistors.pdf RCA Nuvistor Reference (PDF)]
* [http://w140.com/RCA_Nuvistors.pdf RCA Nuvistor Reference (PDF)]
* [https://www.radiomuseum.org/tubes/tube_8056.html 8056] @ radiomuseum.org
* [https://www.radiomuseum.org/tubes/tube_8056.html 8056 @ radiomuseum.org]




[[Category:Triodes]]
[[Category:Triodes]]
[[Category:Nuvistors]]
[[Category:Nuvistors]]

Navigation menu