132
edits
DM502: Difference between revisions
Jump to navigation
Jump to search
Description changed; added transistor thermal probe; changed spec.
No edit summary |
(Description changed; added transistor thermal probe; changed spec.) |
||
| Line 5: | Line 5: | ||
}} | }} | ||
It has an Int/Ext switch that allows alternate input connections via the rear interface to be selected. | It has an Int/Ext switch that allows alternate input connections via the rear interface to be selected. | ||
The DM502 is available with an input for temperature measurement with a transistor temperatur probe ([[P6430]]) using a NPN-Transistor, e.g. 2N2484 (any NPN-Transistor with hFE>150 can be used. | |||
The DM502A model adds an input for a PT-100 temperature probe ([[P6601]]), a true RMS converter, and offset circuits to read dB directly in all ranges. | The DM502A model adds an input for a PT-100 temperature probe ([[P6601]]), a true RMS converter, and offset circuits to read dB directly in all ranges. | ||
The 2-kΩ-measurement range (+HI in DM502A) can be used for diode testing, since a current source of 1mA is active | |||
and the reading corresponds to the (forward) voltage drop of the diode in Volt. The voltage can rise to a maximum of 10 V. Use a second voltmeter to measure the voltage if 2 V are exceeded. | |||
{{BeginSpecs}} | {{BeginSpecs}} | ||
{{Spec | Voltage ranges | 200 mV to 200 V in decade steps; 1 kV (DC) / 500 V (AC) top range}} | {{Spec | Voltage ranges | 200 mV to 200 V in decade steps; 1 kV (DC) / 500 V (AC) top range}} | ||
{{Spec | Input impedance DM502 | 10 MΩ or direct JFET input >2 GΩ (by internal jumper) }} | |||
{{Spec | Input impedance DM502A | 10 MΩ}} | |||
{{Spec | Current ranges | 200 μA to 2 A in decade steps }} | {{Spec | Current ranges | 200 μA to 2 A in decade steps }} | ||
{{Spec | Resistance ranges | 200 Ω to 20 MΩ in decade steps }} | {{Spec | Resistance ranges | 200 Ω to 20 MΩ in decade steps }} | ||