7904: Difference between revisions

Jump to navigation Jump to search

7904 (view source)

Revision as of 07:27, 24 May 2024

3,632 bytes added ,  24 May
m
Corrected vid title
No edit summary
m (Corrected vid title)
(41 intermediate revisions by 8 users not shown)
Line 1: Line 1:
{{Oscilloscope Sidebar|
{{Oscilloscope Sidebar  
title=Tektronix 7904|
|manufacturer=Tektronix
image=Tek-7904-front.jpg |
|series=7000-series scopes
caption=Tektronix 7904 (with [[7A19]], [[7A11]], [[7D11]], [[7B85]]) |
|model= 7904
introduced=1971 |
|designers=Val Garuts;Thor Hallen;John McCormick;Les Larson;Bill DeVey;Bill Peek;Hans Springer;Joe Burger;Joel Swanno;Ken Hawken
discontinued=1990 |
|image=Tek-7904-front.jpg
summary=500 MHz non-storage mainframe|
|caption=Tektronix 7904 (with [[7A19]], [[7A11]], [[7D11]], [[7B85]])  
manuals=
|introduced=1971  
* [http://bama.edebris.com/download/tek/7904/Tektronix_7904_Service_May1983.pdf Tektronix 7904 Manual (PDF)]
|discontinued=1990  
* [http://www.ko4bb.com/getsimple/index.php?id=manuals&dir=Tektronix/Tektronix_-_7904A Tektronix 7904A Manual (DjVu)]
|summary=500 MHz non-storage mainframe
* [http://w140.com/Tektronix_7904A_OCRed_by_Tabalabs.pdf Tektronix 7904A Manual (Shannon Hill PDF with OCR)]
|manuals=
* [http://w140.com/Tek_7904_OCRed_by_Tabalabs.pdf Tektronix 7904 Manual (Shannon Hill PDF with OCR)]
'''7904'''
* [http://w140.com/Tek_7904_Power_Supply.pdf Servicing the 7904 High-Efficiency Power Supply (PDF)]
* [[Media:070-1399-00.pdf|Tektronix 7904 Operators Manual]]
* [[Media:070-2390-00.pdf|Tektronix 7904 Instruction Manual with PSU Schematics]] SN B260000+ (OCR)
* [[Media:Servicing the Tek 7904 Power Supply.pdf|Servicing the 7904 High-Efficiency Power Supply]]
* [[Media:Tektronix - 7904 - Horizontal Amplifier B010100 - B079999.pdf|Horizontal Amplifier SN B010100 - B079999]]
'''7904A'''
* [[Media:070-4593-00.pdf|Tektronix 7904A Manual, May 1989 Revision]] (OCR, low quality scan, whole schematics)
* [[Media:070-4593-00 hires split schematics.pdf|Tektronix 7904A Manual, May 1989 Revision]] (OCR, good quality scan, split schematics)
<small>
<small>
'''Modifications'''
'''Modifications'''
* [http://hakanh.com/dl/docs/kitinstructions/050-0650-00.pdf 050-0650-00 (1980) Vertical amplifier IC replacement]
* [https://hakanh.com/dl/docs/kitinstructions/050-0650-00.pdf 050-0650-00 (1980) Vertical amplifier IC replacement]
* [http://hakanh.com/dl/docs/kitinstructions/050-0651-01.pdf 050-0651-01 (1975) Vertical output IC replacement (155-0065-00)]
* [https://hakanh.com/dl/docs/kitinstructions/050-0651-01.pdf 050-0651-01 (1975) Vertical output IC replacement (155-0065-00)]
* [http://hakanh.com/dl/docs/kitinstructions/050-0706-01.pdf 050-0706-01 (1980) Vertical output IC replacement (155-0065-00)]
* [https://hakanh.com/dl/docs/kitinstructions/050-0706-01.pdf 050-0706-01 (1980) Vertical output IC replacement (155-0065-00)]
* [http://hakanh.com/dl/docs/kitinstructions/050-0729-06.pdf 050-0729-06 (1980) A Trigger selector circuit board replacement]
* [https://hakanh.com/dl/docs/kitinstructions/050-0729-06.pdf 050-0729-06 (1980) A Trigger selector circuit board replacement]
* [http://hakanh.com/dl/docs/kitinstructions/050-0730-06.pdf 050-0730-06 (1980) B Trigger selector circuit board replacement]
* [https://hakanh.com/dl/docs/kitinstructions/050-0730-06.pdf 050-0730-06 (1980) B Trigger selector circuit board replacement]
* [http://hakanh.com/dl/docs/kitinstructions/050-0763-03.pdf 050-0763-03 (1981) Vertical interface circuit board replacement]
* [https://hakanh.com/dl/docs/kitinstructions/050-0763-03.pdf 050-0763-03 (1981) Vertical interface circuit board replacement]
* [http://hakanh.com/dl/docs/kitinstructions/050-1014-00.pdf 050-1014-00 (1980) Vertical output IC replacement] ([[155-0064-00]])
* [https://hakanh.com/dl/docs/kitinstructions/050-1014-00.pdf 050-1014-00 (1980) Vertical output IC replacement] ([[155-0064-00]])
* [http://hakanh.com/dl/docs/kitinstructions/050-1723-01.pdf 050-1723-01 (1983) P31 CRT replacement]
* [https://hakanh.com/dl/docs/kitinstructions/050-1723-01.pdf 050-1723-01 (1983) P31 CRT replacement]
* [http://hakanh.com/dl/docs/custommods/7904mod721K.pdf Custom Mod 721K (1972) Single shot readout and/or grat illumination]
* [https://hakanh.com/dl/docs/custommods/7904mod721K.pdf Custom Mod 721K (1972) Single shot readout and/or grat illumination]
</small>
</small>
}}
}}
Line 33: Line 39:
Performance is largely determined by the plug-ins.
Performance is largely determined by the plug-ins.
The [[7A19]] vertical amplifier and [[7B92]] time base were introduced along with the 7904 to match the 500 MHz system bandwidth.   
The [[7A19]] vertical amplifier and [[7B92]] time base were introduced along with the 7904 to match the 500 MHz system bandwidth.   
Design Staff of 7904 Project (from July 1971 Tekscope):
<blockquote>[[Val Garuts]] was project manager and developed the large signal amplifier circuit used in the horizontal and Z-axis amplifiers. [[Thor Hallen]] did the [[7A19]] plug-in and the vertical amplifier, and [[John McCormick]] the horizontal. The trigger and time base ([[7B92]] plug-in) were done by [[Les Larson]] and [[Bill DeVey]]. [[Bill Peek]] worked on the Z-axis amplifier and auto-focus, with [[Hans Springer]] doing the mainframe interface and channel switching. [[Joe Burger]]'s work on the power supply, coupled with [[Joel Swanno]]’s efforts in mechanical design, reduced the weight to only 30 pounds. [[Ken Hawken]] did the fine job on the CRT. </blockquote>


{{BeginSpecs}}
{{BeginSpecs}}
{{Spec | Bandwidth | 500 MHz }}
{{Spec | Bandwidth | 500 MHz }}
{{Spec | Fastest calibrated sweep | 500 ps/Div (with [[7B92A]], other time bases "uncalibrated for first 60 ns") }}
{{Spec | Fastest calibrated sweep | 500 ps/Div (with [[7B92A]], other time bases "uncalibrated for first 60 ns") }}
{{Spec | Calibrator | DC, square wave (1 kHz or ½ B Sweep gate), 4 mV to 40 V in decade steps (2/20/200/400 mV into 50 Ω); 40 mA current loop }}
{{Spec | Vertical modes | Left / Alt / Add / Chop / Right }}
{{Spec | Horizontal modes | A / Alt / Chop / B }}
{{Spec | Trigger Source | Left / Vert Mode / Right }}
{{Spec | Inputs |
* Z Axis (15 V<sub>p-p</sub>)
}}
{{Spec | Outputs |
* Vertical Signal Out (25 mV/Div into 50 Ω, 0.5 V/Div into 1 MΩ)
* +Sawtooth
* +Gate
* camera power
* probe power
}}
{{Spec | CRT |
* Standard: (8×10 Div @ 1 cm), P31 (green) [[154-0644-05]] or P11 (blue) [[154-0644-09]]
* Option 4, high writing speed: (8×10 Div @ 0.5 cm) , P31 (green) [[154-0661-05]] or P11 (blue) [[154-0661-09]]
}}
{{Spec | Acceleration voltage | 24 kV (+21 / -3 kV) }}
{{Spec | Acceleration voltage | 24 kV (+21 / -3 kV) }}
{{Spec | Calibrator (7904) | 4 mV, 40 mV, 400 mV, 4 V or 40 V (p-p) into 1 MΩ; 2 mV, 20 mV, 200 mV or 400 mV into 50 Ω; or 40 mA; selectable 1 kHz, ½ rep. rate of B Sweep Gate, or DC }}
{{Spec | Power | 90−132 V or 180−264 V, 48−440 Hz, 190 W max. }}
{{Spec | Calibrator (7904A) | 4 mV to 4 V (p-p) in decade steps, 1 kHz; 40 mV to 400 mV into 50 Ω }}
{{Spec | Power consumption | 190 W }}
{{Spec | Weight | 13.5 kg (30 lbs) }}
{{Spec | Weight | 13.5 kg (30 lbs) }}
{{Spec | CRT Options |
{{Spec | Size |
* Standard: (8×10 Div @ 1 cm), P31 (green) [[154-0644-05]] or P11 (blue) [[154-0644-09]]
: 34.2 cm × 30.5 cm × 69.5 cm (H×W×L)
* Option 4, high writing speed: (8×10 Div @ 0.5 cm) , P31 (green) [[154-0661-05]] or P11 (blue) [[154-0661-09]]
: (13.5 in x 12.0 in x 23.8 in)
}}
}}
{{EndSpecs}}
{{EndSpecs}}
==Links==
* [[Media:A subnanosecond realtime oscilloscope garuts hallen.pdf|A Subnanosecond Realtime Oscilloscope]], [[Media:Tekscope 1971 V3 N4 Jul 1971.pdf | Tekscope Vol.3 No.4, July 1971]]
* [https://lazyelectrons.wordpress.com/2018/11/24/tektronix-7904-oscilloscope-power-supply-repair/ 7904 Repair with Video]
* [http://amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_mainframe/7904.htm Tek 7904] / [http://amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_mainframe/7904A.htm 7904A] @ amplifier.cd
* [https://www.circuitsathome.com/measurements/repairing-front-panel-buttons-of-tektronix-7904-oscilloscope Repairing front panel buttons of Tektronix 7904 oscilloscope]
* [http://www.barrytech.com/tektronix/tek7000/tek7904.html Tek 7904] / [http://www.barrytech.com/tektronix/tek7000/tek7904a.html 7904A] @ barrytech.com*
* [https://www.youtube.com/watch?v=GQn0EqW-u74 Tektronix 7904A lab check in and LED MOD] by Zenwizard Studios @ YouTube
{{Documents|Link=7904}}
{{Documents|Link=7904A}}


===7904A differences===
===7904A differences===
The 7904A re-implements the vertical amplifier using Hypcon-packaged amplifier chips designed for the [[7104]], such as the [[155-0178-00]].
The 7904A ([[:Category:Introduced in 1984 |introduced in 1984]]) borrows heavily from the previously introduced [[7104]] in terms of front panel layout, mechanical design, and electronics, re-implementing the vertical amplifier using Hypcon-packaged amplifier chips such as the [[155-0178-00]].


The 7904 had an elaborate 5-decade built-in calibrator with variable rate that was dropped from the 7904A. The [[7904 remote control connector|rear remote control connector]] unique to the 7904 was dropped as well.
The 7904 had the elaborate 5-decade built-in calibrator with variable rate that was common on all first-generation 4-bay [[7000-series scopes]], it was dropped from the 7904A. The [[7000-series remote control connector|rear remote control connector]] unique to early 7000-series scopes was dropped as well.
In the 7904A, The Control Illumination switch moved to the rear panel, and the [[7000 series readout system|readout system]]
In the 7904A, The Control Illumination switch moved to the rear panel, and the [[7000 series readout system|readout system]]
gained a pulsed mode in which it is synchronized with the sweep instead of interrupting the display at random times.
gained a pulsed mode in which it is synchronized with the sweep instead of interrupting the display at random times.
Line 58: Line 94:
===Options===
===Options===
<div style="column-count:4;-moz-column-count:4;-webkit-column-count:4">
<div style="column-count:4;-moz-column-count:4;-webkit-column-count:4">
* Opt.1: deletes read out system
* Opt.2: X-Y delay compensation network
* Opt.2: X-Y delay compensation network
* Opt.3: Extra EMI shielding
* Opt.3: Extra EMI shielding
Line 65: Line 102:


==Operation==
==Operation==
The 7904 has many modes of operation.
The 7904 has many modes of operation.
One mode is called "Independent-Pairs Display" in the manual, where the input to the left vertical plug-in is displayed using the B horizontal time-base plug-in,
One mode is called "Independent-Pairs Display" in the manual, where the input to the left vertical plug-in is displayed using the B horizontal time-base plug-in,
and the input to the right vertical plug-in is displayed using the A horizontal time-base plug-in.
and the input to the right vertical plug-in is displayed using the A horizontal time-base plug-in.
This resembles the trace-slaving "ALT" mode that is produced by an [[1A4]] in a [[547]].
This resembles the trace-slaving "ALT" mode that is produced by an [[1A4]] in a [[547]]. Many other modes are available.
Many other modes are available.
It is possible to put vertical plug-ins in the horizontal slots for X-Y operation.
It is possible to put vertical plug-ins in the horizontal slots for X-Y operation.
It is even possible to put a horizontal plug-in in one of the vertical slots to produce a raster scan.   
It is even possible to put a horizontal plug-in in one of the vertical slots to produce a raster scan.   
Line 80: Line 115:


==Internals==
==Internals==
The 7904 uses a switch-mode power supply and has no fan. It incorporates a 65 ns Y delay line.
The 7904(A) incorporates a 65 ns Y delay line.
This delay is too short for some older time bases such as [[7B53]] to display the trigger event.
This delay is too short for some older time bases such as [[7B53]] to display the trigger event. The signal path is completely differential and the internal signal wiring is 50 Ω coax.
The CRT ([[154-0644-05]]) has [[distributed vertical deflection plates]].
 
===7904===
The 7904 uses a switch-mode power supply and has no fan.  


[[Thor Hallen]] designed the main vertical amplifier and the [[7A19]] plugin (Note 1).
[[Thor Hallen]] designed the main vertical amplifier and the [[7A19]] plugin (Note 1).
Line 88: Line 127:
The 7904 makes extensive use of custom integrated circuits and hybrid circuits, inter alia, the [[155-0064-00]] 470-ps output amplifier,
The 7904 makes extensive use of custom integrated circuits and hybrid circuits, inter alia, the [[155-0064-00]] 470-ps output amplifier,
[[155-0022-00]] analog multiplexer for channel switching, [[155-0059-00]] HF amplifier,
[[155-0022-00]] analog multiplexer for channel switching, [[155-0059-00]] HF amplifier,
[[155-0095-01]] and [[155-0095-03]] differential HF amplifiers, and [[155-0067-02]] SMPS controller.
[[155-0095-01]] and [[155-0095-03]] differential HF amplifiers, and [[155-0067-02]] SMPS controller.


The 7904A includes [[155-0173-05]], [[155-0175-05]] and [[155-0178-05]] amplifiers.
Early 7904 have issues with horizontal aberrations for sweep rates of 1 ns/Div or faster. After discovery of the issue modification kits that replace the horizontal amplifier were offered. For more information see the table below and the [[Media:Tek 067-0657-00 with schematics.pdf|manual]] of the [[067-0657-00|067-0657-00 Normalized Ramp Generator]] that was used to investigate and rectify this issue.
{| class="wikitable"
|-
! Serial Number
! A9 Horizontal Amp.
! Issue
! Modification Kit
|-
|B010000-B081987
||670-1632-00
|Fully calibrated sweeps for rates of 1 ns/Div or faster requires a dedicated [[7B92]] (non A!) and the two units to be calibrated as a system.
|050-0636-01
|-
|B081988-B219999
||670-1632-01
|Can be calibrated to either work with magnifier timebases ([[7B70]],[[7B80]]), or alternatively non-magnifying time bases ([[7B92A]]), but not both.
|040-0791-00
|-
|B220000 and above
|670-1632-02/03
|None - fully compatible with all timebases and all sweep rates.
|−
|}


The signal path is completely differential and the internal signal wiring is 50 Ω coax.
===7904A===
The CRT ([[154-0644-05]]) has [[distributed vertical deflection plates]].
The 7904A is a complete redesign and uses the [[155-0173-05]], [[155-0175-05]] and [[155-0178-05]] amplifiers developed for the [[7104]]. A fan is added at the rear switch mode power supply.


==Prices==
==Prices==
Line 122: Line 183:
|align=right| $12,750
|align=right| $12,750
|-
|-
! 2019 value
! In 2022 Dollars
|align=right| $17,640
|align=right| $19,500
|align=right| $18,320
|align=right| $20,300
|align=right| $19,330
|align=right| $21,400
|align=right| $21,550
|align=right| $23,800
|align=right| $24,800
|align=right| $27,400
|-
|-
!rowspan=2| Mainframe with [[7A19]],<br />7A19 Opt. 04, [[7B92]]
!rowspan=2| Mainframe with [[7A19]],<br />7A19 Opt. 04, [[7B92]]
Line 137: Line 198:
|align=right| $24,190
|align=right| $24,190
|-
|-
! 2019 value
! In 2022 Dollars
|align=right| $33,450
|align=right| $37,000
|align=right| $34,690
|align=right| $38,400
|align=right| $37,070
|align=right| $41,000
|align=right| $42,630
|align=right| $47,200
|align=right| $47,050
|align=right| $52,000
|}
|}
==Links==
* [https://lazyelectrons.wordpress.com/2018/11/24/tektronix-7904-oscilloscope-power-supply-repair/ 7904 Repair with Video]
* [[Media:Tekscope 1971 V3 N4 Jul 1971.pdf | Tekscope Vol. 3 No. 4, Jul 1971]]
* [http://amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_mainframe/7904.htm Tek 7904] / [http://amplifier.cd/Test_Equipment/Tektronix/Tektronix_7000_series_mainframe/7904A.htm 7904A] @ amplifier.cd
* [http://www.barrytech.com/tektronix/tek7000/tek7904.html Tek 7904] / [http://www.barrytech.com/tektronix/tek7000/tek7904a.html 7904A] @ barrytech.com
* [https://www.circuitsathome.com/measurements/repairing-front-panel-buttons-of-tektronix-7904-oscilloscope Repairing front panel buttons of Tektronix 7904 oscilloscope]


==Notes==
==Notes==
# See [[7A11]] and [[John Addis]], ''Good Engineering and Fast Vertical Amplifiers'', in Jim Williams (Ed.), ''Analog Circuit Design: Art, Science and Personalities'' (1991), p.114, and [http://w140.com/tektronix_new_products_1972.pdf Tektronix New Products 1972] brochure.
# See [[7A11]] and [[John Addis]], ''Good Engineering and Fast Vertical Amplifiers'', in [[Jim Williams]] (Ed.), ''Analog Circuit Design: Art, Science and Personalities'' (1991), p.114, and [[Media:Tektronix_New_Products_March_1972.pdf|Tektronix New Products 1972]] brochure.
   
   
==Pictures==
==Pictures==
Line 170: Line 223:
7904 interface 2.jpg|Plug-in backplane board rear
7904 interface 2.jpg|Plug-in backplane board rear
Tek7904-backplane-bottom.jpg | Backplane board sandwich seen from below
Tek7904-backplane-bottom.jpg | Backplane board sandwich seen from below
7904-x-amp.jpg | Horizontal (X) amplifier board
7904-x-amp.jpg | Horizontal (X) amplifier board (late >B220000)
7904-y-amp.jpg | Vertical (Y) amplifier board
7904-y-amp.jpg | Vertical (Y) amplifier board
7904-z-amp.jpg | Z amplifier board
7904-z-amp.jpg | Z amplifier board
Line 185: Line 238:
7904-psu-primary-caps.jpg | Primary side capacitors
7904-psu-primary-caps.jpg | Primary side capacitors
7904-psu-transformer.jpg  | Detail view of transformer from the side
7904-psu-transformer.jpg  | Detail view of transformer from the side
Tek_7904_SMPS-xformer.jpeg| Switching transformer
7904-psu-rectifier.jpg    | Secondary side rectifier board
7904-psu-rectifier.jpg    | Secondary side rectifier board
7904-psu-regulator.jpg    | Secondary side post-regulator
7904-psu-regulator.jpg    | Secondary side post-regulator
Tek_7904_SMPS-HV-Block.jpeg| HV block, multiplier
</gallery>
</gallery>


Line 192: Line 247:
<gallery>
<gallery>
7904a-front.jpg |7904A
7904a-front.jpg |7904A
7904A_rear.jpg |7904A Rear
7904A_top1.jpg |7904A Top with Horizontal Amplifier at top right
7904A_right1.jpg |7904A Right with Z-axis on top right and 2nd Gen. Readout board at bottom right
7904A_left1.jpg |7904A Left with Vertical Amplifier (top) and Vertical switch board (bottom)
7904A_topleft1.jpg |7904A Topleft
7904A_left_closeup.jpg |7904A Closeup of Vertical amplifier
7904a lvps1.png|7904A Low-voltage Power Supply Schematic
7904a lvps1.png|7904A Low-voltage Power Supply Schematic
7904a-h-v.jpg | 7904A Horizontal and vertical amplifiers
7904a-h-v.jpg | 7904A Horizontal and vertical amplifiers
</gallery>
</gallery>


==Parts==
{{Parts|7904}}
{{Parts|7904A}}
{{Custom ICs|7000 series readout system}}


[[Category:7000 series non-storage mainframes]]
[[Category:7000 series non-storage mainframes]]
Qfissler
878

edits

Retrieved from "https://w140.com/tekwiki/wiki/Special:MobileDiff/49435...93379"

Navigation menu