DF1: Difference between revisions

Jump to navigation Jump to search
775 bytes added ,  6 July 2020
Added specs from DF1 service manual.
No edit summary
(Added specs from DF1 service manual.)
Line 17: Line 17:
The DF1 is built around a [[Motorola 6800]] microprocessor with two 2K×8 masked ROMs and sixteen 1K×1 SRAMs (2101). It attaches to the 7D01 through a 50-pin [[D-sub connector]] on the right side panel.  
The DF1 is built around a [[Motorola 6800]] microprocessor with two 2K×8 masked ROMs and sixteen 1K×1 SRAMs (2101). It attaches to the 7D01 through a 50-pin [[D-sub connector]] on the right side panel.  


{{MissingSpecs}}
{{BeginSpecs}}
{{Spec | External Read Clock |
* Frequency Range 100 kHz to 500 kHz
* Duty Cycle 50% within 5%.}}
{{Spec | Display |
* Vertical Size — Adjustable from 6.9 div or less to at least 8.1 div from the top of the first line of DF1 readout to the bottom of the last line of DF1 readout.
* Vertical Position — Adjustable to vertical center of display area in any calibrated 7000-series mainframe.
* Horizontal Position — Adjustable to horizontal center of display area in any calibrated 7000-series mainframe.}}
{{Spec | Output Signals |
* Reset Logic Voltage Level — LO: +0.4 V or less at 2 mA.  HI: at least +2.4 V at 2 mA.
* Waveshape — Positive-going rectangular pulse.
* Duration — 100 μs within 50 μs when used with the 7D01 internal read clock.}}
{{EndSpecs}}


==Pictures==
==Pictures==
98

edits

Navigation menu