P6451: Difference between revisions

P6451 (view source)

Revision as of 05:52, 4 June 2021

322 bytes added , 4 June 2021

no edit summary

Peter

Bureaucrats, Interface administrators, Suppressors, Administrators

39,842

edits

@@ Line 1: / Line 1: @@
 [[File:Tek6451-coiled.jpg|thumb|300px|right]]
 The '''Tektronix P6451''' is an 8+1 channel active logic probe designed for use with the [[7D01]], [[7D02]], [[DL502]], [[LA501A]], [[WR501]], [[308]], [[318]], and [[338]].
-It presents nine balanced signals back to the input section of the analyzer − 8 data channels, plus a 9<sup>th</sup> channel that is used either as a clock or as a qualifier.
+It presents nine differential ECL signals back to the input section of the analyzer − 8 data channels, plus a 9<sup>th</sup> channel that is used either as a clock or as a qualifier.
 [[File:P6451-equiv.jpg|thumb|300px|right|Channel equivalent circuit (click to enlarge)]]
@@ Line 11: / Line 11: @@
 It is also possible to use standard jumper wires with pins, sockets or clips on the other end for connecting inputs.
-Part numbers for the P6451 are 010-6451-03 (straight connector) or 010-6451-05 (90° connector e.g. for [[308]]).
+There are two versions of the P6451:
+* Part No. 010-6451-03 has a straight connector, and is intended for 7000-series and TM500 plug-ins (e.g.[[7D02]], [[SA501]]) and [[8550|8550 series]] development systems.
+* Part No. 010-6451-05 has a 90° connector and is intended for 300 series analyzers (e.g. [[308]]). It also has additional series resistance in the inputs for damping ringing caused by a lead set.
 {{BeginSpecs}}
@@ Line 36: / Line 38: @@
 P64xx-jumper.jpg | Using P6451/[[P6406]] probes with jumper wires
 P6451-Terminals.jpg | P6451 lead terminals
+-6451-03 1985.jpg
 </gallery>
 [[Category:Logic analyzer probes]]

P6451: Difference between revisions

P6451 (view source)

Revision as of 05:52, 4 June 2021

Navigation menu